China manufacturer Europe Popular 2 Ton Telescopic Boom Mini Loader with Full Farming Loader/Tractor Attachments with Free Design Custom

Product Description

Europe pipular 2 ton telescopic boom mini loader with full farming loader/tractor attachments

Product Description

 

STEEL CZPT M920 telescopic wheel loader is quite a multifunction machine, you can use it for various work, like farming, gardenning, landscaping, animal house, construction, bee keeping, minicipal work etc. 

Iis a new design to the market which besides the normal function of loaders, also have rear output and 3 point hitch for attachments to be used at the rear end, thus it can be used as both a loader or a tractor
 
Different with normal wheel loaders with torque converter, it adopts fully hydrostatic system, 4 hydraulic wheel motors driving the loader, smooth and vraible speed change 

Tipping cabin, it gives full access for the complete inside parts which is very convenient.

Telescopic boom increase its working scope than normal loaders.

Boom floating function, better handling the work on terrain ground.

Hydraulic and electric output offer multiple powers to the attachments

Hydraulic quick hitch plus more than 40 different attachments, offer a solution for all your work needs.

Product Parameters

Model M920 mini wheel loader 
Dimension with cabin (LxWxH) 3600X1500X2300mm
Max. lifting height (boom retract)  2996mm
Max. lifting height (boom extend)  3746mm
Bucket capacity 1 cbm
Max. loading capacity 2000kg
Min. turning radius 2800mm
Turning angle 450
Min. ground clearance  330mm
Speed 0-12~24 km/h
Weight with bucket  2640 kg
Standard tire 31X15.5-15
Tire pressure 2.8 bar
Oil tank capacity 80L
Pressure 200bar
Working oil flow 50L/minx2
Tracking oil flow 120L/min
Oil model(mineral oil) L-HL46
Fuel tank capacity 52L
Battery 60Ah, 12V
Engine Kohler/Yanmar, 74hp, 4 cylinder, diesel 
Standard configuration: Closed cabin with heating and fan, hydraulic quick coupling, telescopic boom, boom floating, self levering, flexible articulation, standard bucket
Options 
Open ROPS canopy 3 point hitch with hydraulic pto
Normal boom without telescopic  Trailer hook
Rear hydraulic output with separate control Bobcat coupling plate
3 point hitch  Multi-way couipler
Air conditioner  

 

Detailed Photos

Telescopic Boom

Max. reach 3746mm;

Boom flaoting;

Self levering;

Hydraulic quick hitch;

Hydraulic + Electrical output.
Control System

Multifunction joystick control;

Standard heating system;

Optional air conditioner;

Forward/Reverse foot pedal;

Hand accelerator
Driving & Working System

Tipping cabin for easy maintenence;

Piston pump+4 hydraulic motor for transmission;

Variable speed;

Twin pump for working system

Our Advantages

Loader+Tractor, 1 Multi-purpose Machine for all your work
 
Front part is loader, with telescopic boom, hydraulic output, quick hitch and coupling system for various attachments, like bucket, fork, grapple, auger, hammer, lawn mower, etc.
 
 
Rear part is tractor, with hydraulic output and 3-point hitch, for rotary tiller, trailer, etc.
 
STEEL CZPT series wheel loaders are widely used in farming, agriculture, landscaping, gardening, construction, municiple, etc. Along with the loader, we offer a wide range of attachments, a quick idea for you as below

Packaging & Shipping

Thanks to the compact design of STEEL CZPT M910 mini telescopic loader, it can be driven into container directly and fully assembled.

Loading condition:1 set/20ft GP; 3 sets/40ft GP

Company Profile

Direct Manufacturer, 100% guarantee!!
 
We are direct manufacture factory, every aspect in a deal that customer concerns is guaranteed, like price, quality, delivery time and after service.
 
We devoted to offering 1 stop shopping and solution to customers' needs. The products we currently offer covering loaders, telehandlers, excatators and loader attachments. Besides we have our own engineering team, can make customized design/product.  
 
"Honest" is our business way. We appreciate customers' trust, and we are always CZPT as return.
 
We choose "STEEL CAMEL" as our brandname, as all our products were designed for heavy duty work, trouble less and more service, like the what the CZPT do for people.

Till now STEEL CZPT products, telehandlers, wheel loaders, excavators, attachments etc. have been servicing customers in many countries, like Germany, Russia, Poland, UK, Argentina, Australia, USA, Canada, Indonisia, Spain......

With more than 10 years' experience of production and exporting, I'm ready to be your reliable consultant about products and importing procedure anytime. 

Send an inquiry, leave your questions, I will take care of all the rest matters, Anna~

 

Benefits and Uses of Miter Gears

If you've ever looked into the differences between miter gears, you're probably wondering how to choose between a Straight toothed and Hypoid one. Before you decide, however, make sure you know about backlash and what it means. Backlash is the difference between the addendum and dedendum, and it prevents jamming of the gears, protects the mating gear surfaces, and allows for thermal expansion during operation.
gear

Spiral bevel gears

Spiral bevel gears are designed to increase efficiency and reduce cost. The spiral shape creates a profile in which the teeth are cut with a slight curve along their length, making them an excellent choice for heavy-duty applications. Spiral bevel gears are also hypoid gears, with no offsets. Their smaller size means that they are more compact than other types of right-angle gears, and they are much quieter than other types of gear.
Spiral bevel gears feature helical teeth arranged in a 90-degree angle. The design features a slight curve to the teeth, which reduces backlash while increasing flexibility. Because they have no offsets, they won't slip during operation. Spiral bevel gears also have less backlash, making them an excellent choice for high-speed applications. They are also carefully spaced to distribute lubricant over a larger area. They are also very accurate and have a locknut design that prevents them from moving out of alignment.
In addition to the geometric design of bevel gears, CZPT can produce 3D models of spiral bevel gears. This software has gained widespread attention from many companies around the world. In fact, CZPT, a major manufacturer of 5-axis milling machines, recently machined a prototype using a spiral bevel gear model. These results prove that spiral bevel gears can be used in a variety of applications, ranging from precision machining to industrial automation.
Spiral bevel gears are also commonly known as hypoid gears. Hypoid gears differ from spiral bevel gears in that their pitch surface is not at the center of the meshing gear. The benefit of this gear design is that it can handle large loads while maintaining its unique features. They also produce less heat than their bevel counterparts, which can affect the efficiency of nearby components.

Straight toothed miter gears

Miter gears are bevel gears that have a pitch angle of 90 degrees. Their gear ratio is 1:1. Miter gears come in straight and spiral tooth varieties and are available in both commercial and high precision grades. They are a versatile tool for any mechanical application. Below are some benefits and uses of miter gears. A simple explanation of the basic principle of this gear type is given. Read on for more details.
When selecting a miter gear, it is important to choose the right material. Hard faced, high carbon steel is appropriate for applications requiring high load, while nylon and injection molding resins are suitable for lower loads. If a particular gear becomes damaged, it's advisable to replace the entire set, as they are closely linked in shape. The same goes for spiral-cut miter gears. These geared products should be replaced together for proper operation.
Straight bevel gears are the easiest to manufacture. The earliest method was using an indexing head on a planer. Modern manufacturing methods, such as the Revacycle and Coniflex systems, made the process more efficient. CZPT utilizes these newer manufacturing methods and patented them. However, the traditional straight bevel is still the most common and widely used type. It is the simplest to manufacture and is the cheapest type.
SDP/Si is a popular supplier of high-precision gears. The company produces custom miter gears, as well as standard bevel gears. They also offer black oxide and ground bore and tooth surfaces. These gears can be used for many industrial and mechanical applications. They are available in moderate quantities from stock and in partial sizes upon request. There are also different sizes available for specialized applications.
gear

Hypoid bevel gears

The advantages of using Hypoid bevel and helical gears are obvious. Their high speed, low noise, and long life make them ideal for use in motor vehicles. This type of gear is also becoming increasingly popular in the power transmission and motion control industries. Compared to standard bevel and helical gears, they have a higher capacity for torque and can handle high loads with less noise.
Geometrical dimensioning of bevel/hypoid bevel gears is essential to meet ANSI/AGMA/ISO standards. This article examines a few ways to dimension hypoid bevel and helical gears. First, it discusses the limitations of the common datum surface when dimensioning bevel/helical gear pairs. A straight line can't be parallel to the flanks of both the gear and the pinion, which is necessary to determine "normal backlash."
Second, hypoid and helical gears have the same angular pitch, which makes the manufacturing process easier. Hypoid bevel gears are usually made of 2 gears with equal angular pitches. Then, they are assembled to match 1 another. This reduces noise and vibration, and increases power density. It is recommended to follow the standard and avoid using gears that have mismatched angular pitches.
Third, hypoid and helical gears differ in the shape of the teeth. They are different from standard gears because the teeth are more elongated. They are similar in appearance to spiral bevel gears and worm gears, but differ in geometry. While helical gears are symmetrical, hypoid bevel gears are non-conical. As a result, they can produce higher gear ratios and torque.

Crown bevel gears

The geometrical design of bevel gears is extremely complex. The relative contact position and flank form deviations affect both the paired gear geometry and the tooth bearing. In addition, paired gears are also subject to process-linked deviations that affect the tooth bearing and backlash. These characteristics require the use of narrow tolerance fields to avoid quality issues and production costs. The relative position of a miter gear depends on the operating parameters, such as the load and speed.
When selecting a crown bevel gear for a miter-gear system, it is important to choose 1 with the right tooth shape. The teeth of a crown-bevel gear can differ greatly in shape. The radial pitch and diametral pitch cone angles are the most common. The tooth cone angle, or "zerol" angle, is the other important parameter. Crown bevel gears have a wide range of tooth pitches, from flat to spiral.
Crown bevel gears for miter gear are made of high-quality materials. In addition to metal, they can be made of plastic or pre-hardened alloys. The latter are preferred as the material is less expensive and more flexible than steel. Furthermore, crown bevel gears for miter gears are extremely durable, and can withstand extreme conditions. They are often used to replace existing gears that are damaged or worn.
When selecting a crown bevel gear for a miter gear, it is important to know how they relate to each other. This is because the crown bevel gears have a 1:1 speed ratio with a pinion. The same is true for miter gears. When comparing crown bevel gears for miter gears, be sure to understand the radii of the pinion and the ring on the pinion.
gear

Shaft angle requirements for miter gears

Miter gears are used to transmit motion between intersecting shafts at a right angle. Their tooth profile is shaped like the mitre hat worn by a Catholic bishop. Their pitch and number of teeth are also identical. Shaft angle requirements vary depending on the type of application. If the application is for power transmission, miter gears are often used in a differential arrangement. If you're installing miter gears for power transmission, you should know the mounting angle requirements.
Shaft angle requirements for miter gears vary by design. The most common arrangement is perpendicular, but the axes can be angled to almost any angle. Miter gears are also known for their high precision and high strength. Their helix angles are less than 10 degrees. Because the shaft angle requirements for miter gears vary, you should know which type of shaft angle you require before ordering.
To determine the right pitch cone angle, first determine the shaft of the gear you're designing. This angle is called the pitch cone angle. The angle should be at least 90 degrees for the gear and the pinion. The shaft bearings must also be capable of bearing significant forces. Miter gears must be supported by bearings that can withstand significant forces. Shaft angle requirements for miter gears vary from application to application.
For industrial use, miter gears are usually made of plain carbon steel or alloy steel. Some materials are more durable than others and can withstand higher speeds. For commercial use, noise limitations may be important. The gears may be exposed to harsh environments or heavy machine loads. Some types of gears function with teeth missing. But be sure to know the shaft angle requirements for miter gears before you order one.

China manufacturer Europe Popular 2 Ton Telescopic Boom Mini Loader with Full Farming Loader/Tractor Attachments     with Free Design CustomChina manufacturer Europe Popular 2 Ton Telescopic Boom Mini Loader with Full Farming Loader/Tractor Attachments     with Free Design Custom