Category Archives: Product Catalog

China OEM High Precision Reduction Gear Reducer, High-Precision Speed Gear Reducers, Zero-Backlash Robotic Gearboxes, Right Angle Servo Gearboxes gearbox engine

Product Description

Product Features

* Compact structure, integration of alloy aluminum body to ensure the maximum rigidity and corrosion resistance, and easy to assemble with multiple precision machined surface.
* The use of top-level spiral bevel gear, with optimization design, the contact tooth surface of uniform load, allowable hith torque output.
* Gear is made of high strength alloy steel carburizing, grinding precision.
* The design of multiple alloy steel output and input shaft applies to various industrial requirements.
* The simplified structure design with high torque and low backlash applies to applications of precision servo.
* Easy mount, with maintenance-free, no need to replace the grease and long service life.
* Application in Precision Rotary Axis Drives, Travel Gantry and Columns, Material Handling Axis Drives, Industrial Areas in Automation, Aerospace, and Machine Tool and Robotics.

Product Description

Shaft Input Configuration - High Precision Spiral Bevel Gearboxes
* JAC-C Series: Shaft Input Configuration, and Hollow Output Shaft with Two Shrinks Discs.
* Models: JAC065C, JAC075C, JAC090C, JAC0110C, JAC0140C, JAC0170C, JAC210C.
* JAC-H Series: Shaft Input Configuration, and Hollow Output Shaft with Key Way.
* Models: JAC065H, JAC075H, JAC090H, JAC0110H, JAC0140H, JAC0170H, JAC210H.
* JAC-L Series: Shaft Input Configuration, and Solid Output Shaft.
* Models: JAC065L, JAC075L, JAC090L, JAC0110L, JAC0140L, JAC0170L, JAC210L.
* Gear Ratios: Spiral bevel gear set of high precision grinding can achieve from 1:1 to 6:1 as standard.
* Stage: 1 stage (1:1 to 6:1).
* Rated Output Torque (N.m): From 12N.m to 1300N.m.
* Fault Stop Torque = 2 Times of Rated Output Torque.
* Max. Input Speed (rpm): From 2500RPM to 3500RPM.
* Rated Input Speed (rpm): From 1500RPM to 2500RPM.
* Low Backlash (arcmin): From 6 arcmin to 8 arcmin.
* Max. Radial Force (N) Of Output Shaft: From 900N to 11500N.
* Max. Axial Force (N) Of Output Shaft: From 450N to 5750N.
* Max. Radial Force (N) Of Input Shaft: From 700N to 7800N.
* Max. Axial Force (N) Of Input Shaft: From 350N to 3900N.
* Low Noise Level (dB): From 71dB to 82dB.
* High Efficiency (%): 98%.
* Average Life Span (hr): 20000 hours.
* Lubrication: Synthetic lubrication grease
* Mass Moments of Inertia (kg/cm2): From 0.43 kg/cm2 to 195.4 kg/cm2.

Motor Flange Input Configuration - High Precision Spiral Bevel Gearboxes
* JAC-FC Series: Motor Flange Input Configuration, and Hollow Output Shaft with Two Shrinks Discs.
* Models: JAC065FC, JAC075FC, JAC090FC, JAC0110FC, JAC0140FC, JAC0170FC, JAC210FC.
* JAC-FH Series: Motor Flange Input Configuration, and Hollow Output Shaft with Key Way.
* Models: JAC065FH, JAC075FH, JAC090FH, JAC0110FH, JAC0140FH, JAC0170FH, JAC210FH.
* JAC-FL Series: Motor Flange Input Configuration, and CHINAMFG Output Shaft.
* Models: JAC065FL, JAC075FL, JAC090FL, JAC0110FL, JAC0140FL, JAC0170FL, JAC210FL.
* Gear Ratios: Spiral bevel gear set of high precision grinding can achieve from 1:1 to 100:1 as standard, custom-made max. 400:1 ratio.
* Stage: 1 stage (1:1 to 6:1), 2 stage (8:1 to 30:1), 3 stage (32:1 to 100:1).
* Rated Output Torque (N.m): From 12N.m to 1300N.m.
* Fault Stop Torque = 2 Times of Rated Output Torque.
* Max. Input Speed (rpm): From 2000RPM to 5000RPM.
* Rated Input Speed (rpm): From 1500RPM to 2500RPM.
* Low Backlash (arcmin): From 6 arcmin to 15 arcmin.
* Max. Radial Force (N) Of Output Shaft: From 900N to 11500N.
* Max. Axial Force (N) Of Output Shaft: From 450N to 5750N.
* Low Noise Level (dB): From 71dB to 82dB.
* High Efficiency (%): From 94% to 98%.
* Average Life Span (hr): 20000 hours.
* Mass Moments of Inertia (kg/cm2): From 0.15 kg/cm2 to 195.4 kg/cm2.

Product Parameters

Shaft Input Configuration - High Precision Spiral Bevel Gearboxes

Motor Flange Input Configuration - High Precision Spiral Bevel Gearboxes

Product Dimensions

Shaft Input Configuration - High Precision Spiral Bevel Gearboxes
* JAC-C Series: Shaft Input Configuration, and Hollow Output Shaft with Two Shrinks Discs.
* Models: JAC065C, JAC075C, JAC090C, JAC0110C, JAC0140C, JAC0170C, JAC210C.

Shaft Input Configuration - High Precision Spiral Bevel Gearboxes
* JAC-H Series: Shaft Input Configuration, and Hollow Output Shaft with Key Way.
* Models: JAC065H, JAC075H, JAC090H, JAC0110H, JAC0140H, JAC0170H, JAC210H.

Shaft Input Configuration - High Precision Spiral Bevel Gearboxes
* JAC-L Series: Shaft Input Configuration, and Solid Output Shaft.
* Models: JAC065L, JAC075L, JAC090L, JAC0110L, JAC0140L, JAC0170L, JAC210L.

Motor Flange Input Configuration - High Precision Spiral Bevel Gearboxes
* JAC-FL Series: Motor Flange Input Configuration, and CHINAMFG Output Shaft.
* Models: JAC065FL, JAC075FL, JAC090FL, JAC0110FL, JAC0140FL, JAC0170FL, JAC210FL.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function:	Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout:	Right-Angle, 90 Degree
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	1-Stage, 2-Stage, 3-Stage

Customization:	Available \| Customized Request

servo gearbox

High-Speed Applications and Accuracy in Servo Gearboxes

Servo gearboxes can indeed be used in high-speed applications without compromising accuracy, thanks to their design features:

1. Precision Engineering: Servo gearboxes are engineered with high precision, which allows them to maintain accurate motion control even at high speeds.

2. Reduced Backlash: Many servo gearbox designs incorporate mechanisms to minimize backlash, which is the lost motion between input and output. This feature enhances accuracy even in high-speed scenarios.

3. Advanced Bearings: High-quality bearings used in servo gearboxes reduce friction and contribute to maintaining accuracy and efficiency at high speeds.

4. Rigid Construction: The rigid construction of servo gearboxes minimizes flexing or deformation under high-speed loads, ensuring that the intended motion is accurately transmitted.

5. Dynamic Balancing: Some servo gearboxes are dynamically balanced to minimize vibrations that could affect accuracy during high-speed operation.

6. Lubrication: Proper lubrication practices play a vital role. The right lubricant minimizes friction, heat, and wear, ensuring accuracy even at high speeds.

7. Feedback Systems: High-speed applications often use feedback systems, such as encoders, to constantly monitor and adjust the positioning. This further enhances accuracy.

8. Advanced Control Algorithms: The combination of accurate gearboxes and advanced control algorithms ensures precise motion profiles even at high speeds.

Overall, servo gearboxes are designed to excel in accuracy, precision, and efficiency, making them suitable for high-speed applications where maintaining accuracy is crucial.

servo gearbox

Contribution of Servo Gearboxes to Smooth Acceleration and Deceleration

Servo gearboxes play a crucial role in ensuring smooth acceleration and deceleration of machinery in motion control systems:

1. Precise Control: Servo gearboxes provide precise control over the rotational speed and torque of the output shaft. This control allows for gradual and controlled changes in speed, resulting in smooth acceleration and deceleration.

2. Feedback Mechanism: Servo systems typically incorporate feedback devices such as encoders or resolvers. These devices continuously monitor the actual position and speed of the output shaft and provide real-time feedback to the controller. This feedback enables the controller to adjust the input signals to the servo gearbox, ensuring accurate and smooth motion transitions.

3. Dynamic Response: Servo gearboxes are designed for high dynamic response, meaning they can quickly adjust their speed and torque based on the controller's commands. This responsiveness allows for rapid and smooth changes in speed and direction without sudden jerks or jolts.

4. Programmable Profiles: Many servo systems offer the capability to program acceleration and deceleration profiles. Engineers can define specific acceleration and deceleration curves tailored to the application's requirements. These profiles ensure that the machinery achieves the desired speed changes gradually and smoothly.

5. Reduced Wear and Tear: The controlled and gradual acceleration and deceleration provided by servo gearboxes reduce the wear and tear on mechanical components. Sudden changes in speed can lead to shock loads and vibration, potentially damaging the machinery. Servo gearboxes help mitigate these effects, extending the lifespan of components.

6. Increased Productivity: Smooth acceleration and deceleration reduce the chances of product damage, improve product quality, and enhance the overall efficiency of the process. This is particularly important in applications where precise motion control is critical.

Overall, servo gearboxes contribute to the seamless acceleration and deceleration of machinery by providing accurate control, dynamic responsiveness, and programmable motion profiles. These features ensure that machinery can achieve the desired speed changes while maintaining precision, efficiency, and longevity.

servo gearbox

Servo Gearboxes vs. Standard Gearboxes in Industrial Applications

Servo gearboxes and standard gearboxes serve distinct roles in industrial applications. Here's how they differ:

Precision Control: Servo gearboxes are specifically designed for precise motion control in applications that require accurate speed and position control. Standard gearboxes, while also providing speed reduction or torque multiplication, may not offer the same level of precision.

Backlash: Servo gearboxes are designed to minimize backlash, which is crucial for applications where even slight lost motion is unacceptable. Standard gearboxes may have higher levels of backlash due to their broader design scope.

Dynamic Response: Servo gearboxes excel in dynamic response, enabling quick changes in speed and direction with minimal overshoot. Standard gearboxes may not offer the same level of responsiveness.

High Efficiency: Servo gearboxes are optimized for efficiency to ensure precise power transmission. Standard gearboxes may prioritize other factors like cost or load capacity.

Positioning Accuracy: Servo gearboxes are essential for achieving high positioning accuracy in applications such as robotics and CNC machines. Standard gearboxes might not meet the same accuracy requirements.

Load Distribution: Servo gearboxes distribute loads evenly across gear teeth to enhance durability and minimize wear. Standard gearboxes might not have the same load distribution capabilities.

Compact Design: Servo gearboxes are often designed with a compact form factor to fit within tight spaces. Standard gearboxes might be larger and less optimized for space constraints.

Customization: Servo gearboxes can be highly customizable in terms of size, reduction ratio, and mounting options. Standard gearboxes may offer fewer customization choices.

Application Focus: Servo gearboxes are intended for applications that demand precision and responsiveness, such as robotics, automation, and CNC machining. Standard gearboxes are used in a broader range of applications where precision might not be as critical.

In summary, servo gearboxes are specialized components tailored for high-precision motion control applications, while standard gearboxes serve a wider variety of industrial needs with a focus on durability, load handling, and basic speed reduction.

China OEM High Precision Reduction Gear Reducer, High-Precision Speed Gear Reducers, Zero-Backlash Robotic Gearboxes, Right Angle Servo Gearboxes gearbox engine
editor by CX 2024-03-27

China Hot selling Farm Irrigation Systems Pto Gearbox Shafts sequential gearbox

Product Description

Farm Irrigation Systems pto Gearbox Shafts

Product Description

Here is our advantages when compare to similar products from China:

1. Large output torque

2. Safe, reliable, economical, and durable

3. Stable transmission, quiet operation

4. High modularization design, may equip with various outer power inputs conveniently. The same machine type may equip with various power motors. It is easy to realize the combination and junction between every machine type

5. Form of installation: The position to be installed is not limited

6. High strength, compact the box body of high strength cast iron, gear and gear shaft adopt the gas carbonization, quenching, and fine grinding process, therefore the bearing capacity of unit volume is high

7. Long life: Under the condition of the correct type chosen(including choosing suitable operation parament ) normal operation and maintenance, the life of the main parts speed reducer(except wearing parts)should not be less than 20000 hours

8. Low noise: Because the main parts of the speed reducer are processed, and tested critically, therefore the noise of the speed reducer is low

Product Specifications

ITEM	HN25710.131.00
Ratio	1.31:1
Teeth	16/21
Module	7.0
Power	100
Rated Input	600rpm
Input/Output Description	8-Φ48X Φ42X8
Weight(N.W)	58Kg

Certifications

Equipment

Company Profile

HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of " High Quality, Customers'Satisfaction", using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.

FAQ

1.WHAT'S THE PAYMENT TERM?

When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.

2.HOW TO DELIVER THE GOODS TO US?

Usually we will ship the goods to you by sea.

3.How long is your delivery time and shipment?

30-45days

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type:	Cultivator Gearbox
Usage:	Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery
Material:	20 Crmnti
Power Source:	Agricultural Machinery,Farm Tractor
Weight:	22-60g
After-sales Service:	Online Support

Samples:	US$ 30/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

irrigation gearbox

Factors in Selecting the Right Irrigation Gearbox

Choosing the appropriate irrigation gearbox involves considering several key factors to ensure optimal performance and water distribution efficiency:

Irrigation Method: Different irrigation methods (pivot, linear, drip, etc.) have specific gearbox requirements. The gearbox must match the motion and distribution pattern of the chosen method.
Load Capacity: The gearbox should be able to handle the load imposed by the irrigation equipment, including the weight of pipes, hoses, and sprinklers.
Adjustability: For pivot and linear irrigation, the gearbox should allow for precise adjustments to control the radius of coverage.
Environmental Conditions: The gearbox should be designed to withstand exposure to water, moisture, dirt, and varying weather conditions.
Speed and Torque: The gearbox's speed and torque specifications must match the requirements of the irrigation system's movement and water distribution needs.
Durability: The gearbox should have a robust construction to ensure a long lifespan, even in challenging agricultural environments.
Efficiency: An efficient gearbox minimizes energy consumption, contributing to overall system efficiency.
Compatibility: The gearbox must be compatible with the other components of the irrigation system, including motors, control systems, and actuators.
Maintenance: Easy access for maintenance and servicing is crucial to prevent downtime during critical watering periods.
Cost: Balancing performance and cost is essential to ensure that the selected gearbox provides the best value for the investment.

By carefully evaluating these factors, farmers and agricultural professionals can choose the right irrigation gearbox that meets the specific needs of their irrigation system and contributes to efficient water distribution and crop growth.

irrigation gearbox

Contribution of Irrigation Gearboxes to Water Conservation in Agriculture

Irrigation gearboxes play a significant role in promoting water conservation in agricultural practices through various mechanisms:

Precision Water Distribution: Irrigation gearboxes enable precise control over water distribution. This accuracy ensures that water is delivered directly to the crops' root zones, minimizing wastage due to overspray or runoff.
Adjustable Flow Rates: Many irrigation gearboxes allow for adjustable flow rates, allowing farmers to tailor the irrigation process to the specific water needs of different crops and soil types.
Programmable Scheduling: Some irrigation gearboxes are equipped with programmable timers and scheduling features. This capability enables irrigation to occur during optimal times when water evaporation rates are lower, reducing water loss.
Zoning and Section Control: Advanced irrigation systems using gearboxes can implement zoning and section control, directing water only to areas that require it. This prevents wastage on non-cultivated or adequately irrigated areas.
Efficient Water Management: By providing consistent and uniform water distribution, irrigation gearboxes help avoid underwatering or overwatering, both of which can lead to water waste and inefficient resource utilization.
Reduced Runoff and Erosion: Properly calibrated irrigation systems with gearboxes minimize excessive runoff and soil erosion, preserving both water and soil resources.
Drip Irrigation Enhancement: In drip irrigation systems, irrigation gearboxes play a role in maintaining optimal pressure levels and ensuring uniform water delivery to each plant, further enhancing water conservation.
Adaptation to Terrain: Gear-driven irrigation systems can adapt to varying terrain, ensuring that water reaches plants situated on slopes without excessive runoff.

The application of irrigation gearboxes helps farmers use water more efficiently, minimizing waste, and contributing to sustainable agricultural practices and water conservation efforts.

irrigation gearbox

Handling Variations in Water Pressure and Flow with Irrigation Gearboxes

Irrigation gearboxes are designed to effectively handle variations in water pressure and flow, ensuring consistent and uniform water distribution across the irrigated area. Here's how they accomplish this:

Pressure Regulation: Many irrigation gearboxes are equipped with pressure regulation mechanisms. These mechanisms can adjust the gearbox's internal components to accommodate changes in water pressure, maintaining a steady output regardless of fluctuations.
Flow Control: Irrigation gearboxes can control the flow rate of water by adjusting the rotational speed of the output shaft. This control allows for precise water distribution, even when the input water flow rate changes.
Optimized Gearing: The gearbox's internal gearing system is designed to provide consistent performance even under varying loads. High-quality materials and precision engineering ensure that the gearbox can handle different conditions without compromising efficiency.
Feedback Mechanisms: Some advanced irrigation systems include feedback mechanisms that monitor water pressure and flow in real time. These feedback signals can be used to automatically adjust the gearbox's settings for optimal performance.

Overall, irrigation gearboxes are engineered to maintain reliable and consistent water distribution regardless of changes in water pressure and flow. This capability is crucial for ensuring that crops, plants, and landscapes receive the required amount of water for healthy growth.

China Hot selling Farm Irrigation Systems Pto Gearbox Shafts sequential gearbox
editor by CX 2024-03-27

China Best Sales CZPT Wheel Gearbox on Zimmatic Center CZPT and Lateral Move Irrigation System with Hot selling

Product Description

UMC is the industry leader in gearbox technology. Over our 40 year history we have introduced many industry changing gearboxes such as the patented TNT gearbox, the 740, the 760, the 775 and more. We continue to define and redefine industry standards for gearbox performance, quality, features and technology. Our gearboxes are purpose built to do the job. Never over-engineered.

UMC stands behind its products and is committed to manufacturing the best products for a global market.

740-U 50:1 Ratio

Designed for longer spans, larger wheels, and heavier towers.

Features and Benefits

2.25 inch output shaft
50:1 gear ratio
Cartridge input and output seals
Larger input bearings
Input shaft guard
External seal protectors for input and output seals
Top oil fill plug
Universal mounting pattern
Full cycle expansion chamber with stainless steel cover
Filled with extreme pressure worm gear oil
Steel output shaft and input shaft
Tapered roller bearings
Includes carriage bolts and nuts
Dual ended input shaft

740-UV 52:1 Ratio
Designed for longer spans, larger wheels and heavier towers where an extended output shaft is required.
This gearbox has all the same capabilities, features and benefits that the standard 740 has with a few tweaks. The output shaft is extended, the gear ratio is 52:1 and the input shaft is made of ductile iron with a 25° pressure angle allowing this gearbox to be used on center CHINAMFG and lateral move/ linear systems that come standard with these specifications.

Features and Benefits

2.25 inch extended output shaft
52:1 gear ratio with 25° pressure angle
Cartridge input and output seals
Larger input bearings
Input shaft guard
External seal protectors for input and output seals
Top oil fill plug
Universal mounting pattern
Full cycle expansion chamber with stainless steel cover
Filled with extreme pressure worm gear oil
Steel output shaft and ductile iron input shaft
Tapered roller bearings
Includes carriage bolts and nuts
Dual ended input shaft

760-UV Gearbox

Designed for corner systems and lateral move carts where an extended output shaft is required

Growers typically use UMC's 760-UV gearbox for the most extreme applications where an extended output shaft is required. The gearbox is designed for higher annual hours of operation while handling the heavy loads experienced on corner systems and lateral move carts as well as the most extreme field conditions where wheel rutting is prominent, soil is heavy, and tower weights are higher.

The UMC 760-UV final drive gearbox is our largest and most durable gearbox with an extended output shaft. It features a larger-diameter bull gear than the standard 740 series to handle 20% higher torque. It also features a 2.5″ output shaft to accommodate more overhung load. It is designed for use on center pivots, corners, lateral move/ linear irrigation systems and carts where a 52:1 gear ratio and extended output shaft are standard specifications.

Features and Benefits

2.5″ output shaft
52:1 gear ratio with a 25° pressure angle
Unique dual input and output seal design
20% more torque capacity than the standard 740
Bronze gear optional
Larger input bearings
Input shaft guard
External seal protectors for input and output seals
11-Bolt mounting pattern
Full cycle expansion chamber with aluminum cover
Filled with extreme pressure worm gear oil
Steel output shaft and ductile iron input shaft
Tapered roller bearings
Includes carriage bolts and nuts
Dual ended input shaft

TNT-2 Gearbox

Designed for applications where the irrigation system may need to be towed

This gearbox is the perfect solution for a towable irrigation system. Growers typically prefer this gearbox over a gearbox with a towable hub. Simply disengage the worm and tow your system to its working location, then re-engage the worm and you are ready to run. The CX coupler is the perfect compliment for the TNT-2 gearbox due to the ability to control coupler disengagement at the gearbox.

The UMC patented TNT-2 final drive gearbox is designed specifically for applications where a center CHINAMFG or lateral move/ linear irrigation system needs to be towed. The gearbox provides the ability to disengage the worm gear and allows users to move systems from 1 area to another without requiring a Towable Hub add on.

Features and Benefits

2.25″ output shaft
50:1 gear ratio
Dual input seals with triple lip output seals
Bronze gear optional
Input shaft guard
External seal protectors for input and output seals
Top oil fill plug
11-Bolt mounting pattern
Full cycle expansion chamber with stainless steel cover
Filled with extreme pressure worm gear oil
Steel output shaft and input shaft
Tapered roller bearings
Includes carriage bolts and nuts
Dual ended input shaft

760-UV Bronze Gearbox

Designed for the most extreme conditions where an extended output shaft is required.

Growers typically use The UMC 760-UV bronze gearbox for the most extreme applications where an extended output shaft is required. The gearbox is designed for higher annual hours of operation while handling the heavy loads experienced on corner systems and lateral move carts as well as the most extreme field conditions where wheel rutting is prominent, soil is heavy, and tower weights are higher.

The UMC 760-UV Bronze final drive gearbox is our largest and most durable gearbox with an extended output shaft designed for the most extreme growing conditions. It features a high strength aluminum bronze bull gear and a heat treated steel worm gear giving it a much higher load capacity than the standard 760-UV. Additionally, this gear combination greatly reduces gear wear, extending the useful life of the gearbox. It also features a 2.5″ output shaft to accommodate more overhung load. It is designed for use on center pivots, corners, lateral move/ linear irrigation systems and carts where a 52:1 gear ratio and extended output shaft are standard specifications.

Features and Benefits

2.5″ output shaft
52:1 gear ratio with a 25° pressure angle
Unique dual input and output seal design
Bronze Gear
Heat Treated Steel Worm Gear
Larger input bearings
Input shaft guard
External seal protectors for input and output seals
11-Bolt mounting pattern
Full cycle expansion chamber with aluminum cover
Filled with extreme pressure worm gear oil
Steel output shaft
Tapered roller bearings
Includes carriage bolts and nuts
Dual ended input shaft
Also Available Assembled in the USA

CHINAMFG is the industry leader in gearbox technology. Over 37 year history they have introduced many industry changing gearboxes such as the patented TNT gearbox, the 740, the 760, the 775 and more. CHINAMFG continue to define and redefine industry standards for gearbox performance, quality, features and technology. CHINAMFG gearboxes are purpose built to do the job. Never over-engineered.UMC stands behind its products and is committed to manufacturing the best products for a global market.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Agricultural Machinery, Agricultural
Function:	Speed Reduction
Hardness:	Hardened
Type:	Worm and Wormwheel
Material:	Cast Iron
Manipulate Way:	Semi-Automatic Manipulation

Customization:	Available \| Customized Request

irrigation gearbox

Precise Control of Irrigation Equipment with Gearboxes

Irrigation gearboxes play a crucial role in ensuring precise control of irrigation equipment, especially in pivot and linear irrigation systems. Here's how they achieve this:

Ratio and Speed Control: Gearboxes are designed to provide precise control over the rotational speed and direction of motion. This allows farmers to adjust the speed at which the irrigation equipment moves along the designated path.
Adjustability: Gearboxes often come with adjustable settings that enable farmers to customize the angle and radius of coverage. In pivot irrigation, for instance, gearboxes control the pivot point, allowing for varying degrees of rotation and precise positioning of sprinklers.
Positional Accuracy: Gearboxes ensure accurate positioning of irrigation equipment by translating the rotational motion of the motor into linear movement along a specific path. This accuracy is essential to evenly distribute water across the field and avoid over-watering or under-watering.
Repeatability: Gearboxes provide consistent and repeatable movement, ensuring that irrigation equipment follows the same path with each cycle. This repeatability is vital for maintaining uniform water distribution and optimizing crop growth.
Integration with Control Systems: Many modern irrigation systems incorporate advanced control systems that can precisely adjust the gearbox's settings based on factors such as soil moisture levels, weather conditions, and specific crop requirements.
Automation: Gearboxes can be integrated into automated irrigation systems that can be programmed to start, stop, and adjust movement patterns automatically. This level of automation ensures precise and efficient water distribution without the need for constant manual intervention.

By providing the means to control speed, angle, and direction, irrigation gearboxes enable farmers to achieve accurate and efficient water distribution, resulting in healthier crops and optimized water usage.

irrigation gearbox

Disadvantages and Limitations of Using Irrigation Gear Systems

While irrigation gear systems offer numerous benefits, they also come with some disadvantages and limitations:

Cost: Irrigation gear systems can be relatively expensive to install and maintain, especially when compared to manual irrigation methods. The initial investment includes the cost of gearboxes, motors, pumps, and other associated components.
Maintenance: Regular maintenance is essential to keep irrigation gear systems functioning properly. Gearboxes and other mechanical components require periodic checks, lubrication, and potential repairs, which can add to maintenance costs and downtime.
Complexity: The complexity of irrigation gear systems can pose challenges for farmers who are not familiar with mechanical systems. Troubleshooting issues or making adjustments might require technical expertise.
Dependence on Power: Many irrigation gear systems rely on electricity to operate, which can be a limitation in areas with unreliable power sources or during power outages.
Environmental Impact: Depending on the energy source used, irrigation gear systems can have an environmental impact, especially if they are powered by non-renewable resources.
Site Limitations: The suitability of irrigation gear systems depends on the layout and terrain of the field. Steep slopes, rocky terrain, or irregular field shapes might limit the effectiveness of these systems.

Despite these limitations, proper planning, maintenance, and operational considerations can help mitigate these challenges, allowing farmers to harness the benefits of irrigation gear systems while addressing their drawbacks.

irrigation gearbox

Variations in Irrigation Gearbox Designs for Specific Irrigation Methods

Irrigation gearbox designs can vary based on the specific irrigation methods they are intended to be used with. Different irrigation techniques require different gearboxes to optimize water distribution. Here are some examples of variations in irrigation gearbox designs:

Pivot Irrigation: Pivot irrigation systems use linear move or center pivot systems to distribute water in a circular pattern. Gearboxes for pivot irrigation often have a high degree of angular adjustability to accommodate the circular motion. They may also feature specialized seals and coatings to withstand exposure to water and environmental factors.
Linear Irrigation: Linear irrigation involves moving the water distribution equipment along a straight line. Gearboxes for linear irrigation systems need to provide smooth and precise linear motion. They may incorporate linear actuators or guides to ensure accurate movement.
Drip Irrigation: Drip irrigation delivers water directly to the plant root zone. Gearboxes for drip irrigation may be part of valve control systems that regulate the water flow to individual drip lines. These gearboxes need to be compact and efficient in controlling the flow rate.
Sprinkler Irrigation: Sprinkler systems disperse water over the cultivated area in a spray pattern. Gearboxes for sprinkler irrigation may be used in the rotating heads of sprinklers. They need to provide reliable rotation and positioning for even water coverage.
Subsurface Irrigation: Subsurface irrigation delivers water below the soil surface. Gearboxes for subsurface irrigation may be used in valve systems controlling the water release from underground pipes. They require durability and resistance to soil and moisture.

These variations in irrigation gearbox designs reflect the diverse needs of different irrigation methods. Customized gearbox designs help ensure efficient and effective water distribution for various agricultural and landscaping applications.

China Best Sales CZPT Wheel Gearbox on Zimmatic Center CZPT and Lateral Move Irrigation System with Hot selling
editor by CX 2024-03-26

China supplier Suitable for Industrial Robot Medical Equipment Ultra-Thin Series Hmhg Harmonic Precision Reducer Hmhg-14-II-E best automatic gearbox

Product Description

The HMHG-II-E series harmonic reducer has a compact machine structure where the input shaft is connected to the inner hole of the wave generator through an integral cam. It can be used with either a rigid wheel end fixed or flexible wheel end output connection mode. Currently available in production specifications ranging from 14 to 40, this series finds its main applications in aerospace, robotics, semiconductors, power inspection, and automation equipment.

Principle of harmonic gear transmission
The harmonic gear drive was invented by the American inventor C.W.Musser in 1955. It is a new transmission mode using the elastic deformation of flexible working components to carry out movement or power transmission. It breaks through the mode of mechanical transmission using rigid components and uses a flexible component to achieve mechanical transmission. Thus, a series of special functions that are difficult to achieve with other drives are obtained. Because the deformation process of the intermediate flexible component is basically a symmetrical harmonic, it is named. In addition to the Soviet Union called this transmission waveform drive or flexible wheel drive, the United States, Britain, Germany, Japan and other countries are called "harmonic drive".

Harmonic deceleration principle
The deceleration principle of harmonic gear transmission refers to the use of the relative motion of the flexwheel, rigid wheel and wave generator, mainly the controllable elastic deformation of the flexwheel to achieve motion and power transmission. The elliptic CAM in the wave generator rotates in the flexwheel so that the flexwheel deforms. When the flexwheel teeth and rigid wheel teeth at both ends of the long axis of the elliptic CAM of the wave generator are engaged, the flexwheel teeth at both ends of the short axis are detached from the rigid wheel teeth. The teeth between the long axis and the short axis of the wave generator are in a semi-meshing state that gradually enters the snapping along different sections of the perimeter of the flexwheel and the rigid wheel, which is called the snapping; In a semi-meshing state that gradually withdraws from engagement, it is called snapping out. When the wave generator continuously rotates, the flexwheel constantly deforms, so that the 2 wheel teeth in the biting, meshing, biting out and disengaging 4 kinds of motion constantly change their original working state, resulting in the wrong tooth movement, to achieve the active wave generator to the flexwheel movement transmission.

Product Parameters

Model	Reduction ratio	Rated torque at input 2000r/min	Permissible CHINAMFG torque at start/ stop	Permissible max.value of ave.load torque	instantaneous permissible max. torque	Permissibie max.input rotational speed	Permissible ave.input rotational speed	Backlash(arc sec)	Transmission accuracy(arc sec)
Model	Reduction ratio	Nm	Nm	Nm	Nm	r/min	r/min	≤	≤
14	50	7	23	9	46	8000	3500	20	90
	80	10	30	14	51			20	90
	100	10	36	14	70			10	90
17	50	21	44	34	91	7000	3500	20	90
	80	29	56	35	113			20	90
	100	31	70	51	143			10	90
20	50	33	73	44	127	6000	3500	20	60
	80	44	96	61	165			20	60
	100	52	107	64	191			10	60
	120	52	113	64	161			10	60
25	50	51	127	72	242	5500	3500	20	60
	80	82	178	113	332			20	60
	100	87	204	140	369			10	60
	120	87	217	140	395			10	60
32	50	99	281	140	497	4500	3500	20	60
	80	153	395	217	738			10	60
	100	178	433	281	841			10	60
	120	178	459	281	892			10	60
40	50	178	523	255	892	4000	3000	10	60
	80	268	675	369	1270			10	60
	100	345	738	484	1400			10	60
	120	382	802	586	1530			10	60

Detailed Photos

Company Profile

HangZhou Yijiaang Automation Technology Co., Ltd. was established in 2018, specializing in the application development, sales and technical services of transmission components. Main business: planetary reducer, harmonic reducer, RV reducer, DD motor, linear motor, linear module, rotary spline screw, hollow rotary platform, CAM splitter and other products. Widely used in: CNC machine tools, packaging machinery, printing machinery, automation equipment, joint robots, medical equipment, AGV and many other fields. The company regards "providing quality products and services" as its due responsibility.
The company adheres to the spirit of technological innovation and customer service, with a positive attitude of continuous endeavour, creates the value of "quality is the core", establishes the goal of "professional perfection", and achieves the corporate vision of "making the world move". Focus on transmission products technical services.

FAQ

Q: What should I provide when I choose gearbox/speed reducer?
A: The best way is to provide the motor drawing with parameter. Our engineer will check and recommend the most suitable gearbox model for your refer.
Or you can also provide below specification as well:
1) Type, model and torque.
2) Ratio or output speed
3) Working condition and connection method
4) Input mode and input speed

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Machinery, Agricultural Machinery, Car, Robot
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

Samples:	US$ 220/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

gear gearbox

How do gear reducers enhance the efficiency of conveyor systems and robotics?

Gear reducers play a significant role in improving the efficiency of both conveyor systems and robotics by optimizing speed, torque, and control. Here's how they contribute:

Conveyor Systems:

In conveyor systems, gear reducers enhance efficiency in the following ways:

Speed Control: Gear reducers allow precise control over the rotational speed of conveyor belts, ensuring that materials are transported at the desired speed for efficient production processes.
Torque Adjustment: By adjusting gear ratios, gear reducers provide the necessary torque to handle varying loads and prevent overloading, minimizing energy wastage.
Reverse Operation: Gear reducers enable smooth bidirectional movement of conveyor belts, facilitating tasks such as loading, unloading, and distribution without the need for additional components.
Synchronization: Gear reducers ensure synchronized movement of multiple conveyor belts in complex systems, optimizing material flow and minimizing jams or bottlenecks.

Robotics:

In robotics, gear reducers enhance efficiency through the following means:

Precision Movement: Gear reducers provide precise control over the movement of robot joints and arms, enabling accurate positioning and manipulation of objects.
Reduced Inertia: Gear reducers help reduce the inertia experienced by robotic components, allowing for quicker and more responsive movements while conserving energy.
Compact Design: Gear reducers offer a compact and lightweight solution for achieving various motion profiles in robotic systems, allowing for efficient use of space and resources.
Torque Amplification: By amplifying torque from the motor, gear reducers enable robots to handle heavier loads and perform tasks that require greater force, enhancing their overall capabilities.

By providing precise speed control, torque adjustment, and reliable motion transmission, gear reducers optimize the performance of conveyor systems and robotics, leading to improved efficiency, reduced energy consumption, and enhanced operational capabilities.

gear gearbox

Can gear reducers be used for both speed reduction and speed increase?

Yes, gear reducers can be utilized for both speed reduction and speed increase, depending on their design and arrangement. The functionality to either decrease or increase rotational speed is achieved by altering the arrangement of gears within the gearbox.

1. Speed Reduction: In speed reduction applications, a gear reducer is designed with gears of different sizes. The input shaft connects to a larger gear, while the output shaft is connected to a smaller gear. As the input shaft rotates, the larger gear turns the smaller gear, resulting in a decrease in output speed compared to the input speed. This configuration provides higher torque output at a lower speed, making it suitable for applications that require increased force or torque.

2. Speed Increase: For speed increase, the gear arrangement is reversed. The input shaft connects to a smaller gear, while the output shaft is connected to a larger gear. As the input shaft rotates, the smaller gear drives the larger gear, resulting in an increase in output speed compared to the input speed. However, the torque output is lower than that of speed reduction configurations.

By choosing the appropriate gear ratios and arrangement, gear reducers can be customized to meet specific speed and torque requirements for various industrial applications. It's important to select the right type of gear reducer and configure it correctly to achieve the desired speed reduction or speed increase.

gear gearbox

Function of Gear Reducers in Mechanical Systems

A gear reducer, also known as a gear reduction unit or gearbox, is a mechanical device designed to reduce the speed of an input shaft while increasing its torque output. It accomplishes this through the use of a set of interlocking gears with different sizes.

The primary function of a gear reducer in mechanical systems is to:

Speed Reduction: The gear reducer takes the high-speed rotation of the input shaft and transmits it to the output shaft through a set of gears. The gears are configured in such a way that the output gear has a larger diameter than the input gear. As a result, the output shaft rotates at a lower speed than the input shaft, but with increased torque.
Torque Increase: Due to the size difference between the input and output gears, the torque applied to the output shaft is greater than that of the input shaft. This torque multiplication allows the system to handle heavier loads and perform tasks requiring higher force.

Gear reducers are widely used in various industries and applications where it's necessary to adapt the speed and torque characteristics of a power source to meet the requirements of the driven equipment. They can be found in machinery such as conveyor systems, industrial machinery, vehicles, and more.

China supplier Suitable for Industrial Robot Medical Equipment Ultra-Thin Series Hmhg Harmonic Precision Reducer Hmhg-14-II-E best automatic gearbox
editor by CX 2024-03-26

China Professional Industrial Robots Gear Reducer Hmcg-I with Hot selling

Product Description

Introducing the HMCG-I Series Harmonic Reducer

Get ready to revolutionize your high precision applications with the HMCG-I series harmonic reducer from HangZhou Yijiaang Automation Technology Co., Ltd! This incredible gearbox is designed to take your aerospace, robotics, semiconductors, power inspection, and automation equipment to new heights.

Experience the Power of Harmonic Gear Transmission

Discover the cutting-edge transmission mode invented by American inventor C.W.Musser in 1955. The HMCG-I series utilizes the elastic deformation of flexible working components to achieve movement and power transmission like never before. Say goodbye to traditional rigid components and embrace the flexibility that brings a whole new level of functionality to your applications.

Unleash the Deceleration Principle

With the HMCG-I series harmonic reducer, you can harness the power of the deceleration principle. Watch as the flexwheel, rigid wheel, and wave generator work together in perfect harmony to achieve seamless motion and power transmission. The innovative design ensures that the flexwheel constantly deforms, resulting in precise and efficient movement transmission.

Product Specifications

Product Name: Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer

Applicable Industries: Machinery, Agricultural Machinery, Car, Robot

Hardened Tooth Surface: Yes

Installation Type: Horizontal Type

Don't miss out on the opportunity to enhance your applications with the HMCG-I series harmonic reducer. Upgrade to the future of precision and efficiency today!

Product Parameters

Model	Reduction ratio	Rated torque at input 2000r/min	Permissible CHINAMFG torque at start/stop	Permissible max.value of ave.load torque	instantaneous permissible max.torque	Permssibie max.input rotational speed	Permissible ave.input rotational speed	Backlash (arc sec)	Transmission accuracy(arc sec)
Model	Reduction ratio	Nm	Nm	Nm	Nm	r/min	r/min	≤	≤
14	50	7	23	9	46	8000	3500	20	90
	80	10	30	14	51			20	90
	100	10	36	14	70			10	90
17	50	21	44	34	91	7000	3500	20	90
	80	29	56	35	113			20	90
	100	31	70	51	143			10	90
20	50	33	73	44	127	6000	3500	20	60
	80	44	96	61	165			20	60
	100	52	107	64	191			10	60
	120	52	113	64	161			10	60
25	50	51	127	72	242	5500	3500	20	60
	80	82	178	113	332			20	60
	100	87	204	140	369			10	60
	120	87	217	140	395			10	60
32	50	99	281	140	497	4500	3500	20	60
	80	153	395	217	738			10	60
	100	178	433	281	841			10	60
	120	178	459	281	892			10	60
40	50	178	523	255	892	4000	3000	10	60
	80	268	675	369	1270			10	60
	100	345	738	484	1400			10	60
	120	382	802	586	1530			10	60

Company Profile

Introducing the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer

Revolutionize your machinery with the cutting-edge technology of the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer from HangZhou Yijiaang Automation Technology Co., Ltd. This product is designed to elevate your transmission components, offering unmatched performance and reliability.

Featuring a hardened tooth surface, this precision reducer ensures durability and longevity, making it ideal for various applications such as machinery, agricultural equipment, cars, and robots. Its horizontal installation design allows for seamless integration into your existing systems, saving you time and effort.

Experience the power of this ultra-thin harmonic reducer with exceptional speed reduction capabilities. Its advanced gearbox technology guarantees smooth and precise operation, enabling seamless performance in CNC machine tools, packaging machinery, printing machinery, automation equipment, joint robots, medical devices, AGV, and more.

At HangZhou Yijiaang Automation Technology Co., Ltd, we are dedicated to delivering top-quality products and services. Our team of experts focuses on technological innovation and customer satisfaction to ensure you have the best experience possible.

Enhance your machinery with the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer and elevate efficiency and productivity. Contact us today to take advantage of this opportunity!

Detailed Photos

FAQ

Introducing the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer

Are you in need of a top-notch gearbox/speed reducer for your machinery, agricultural equipment, car, or robot? Look no further! HangZhou Yijiaang Automation Technology Co., Ltd has the perfect solution for you - our Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer.

With a hardened tooth surface, this reducer is built to withstand even the toughest conditions. Its horizontal installation makes it easy to integrate into your existing setup.

When choosing a gearbox/speed reducer, it's important to provide the necessary information to ensure the perfect fit. You can start by providing the motor drawing with parameters, and our expert engineers will recommend the most suitable gearbox model for your reference. Alternatively, you can provide the following specifications:

Type, model, and torque

Ratio or output speed

Working condition and connection method

Input mode and input speed

By providing these details, you can rest assured that you'll receive a gearbox/speed reducer that meets your exact requirements.

Don't miss out on the opportunity to enhance the performance of your machinery with our Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer. Get in touch with us today and experience the difference!

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Machinery, Agricultural Machinery, Car, Robot
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

Samples:	US$ 200/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

gear gearbox

Can you provide real-world examples of products that use gear reducer technology?

Certainly! Gear reducer technology is widely used in various industries and products to enhance performance and efficiency. Here are some real-world examples:

1. Industrial Machinery: Gear reducers are commonly used in manufacturing machinery, such as conveyor systems, material handling equipment, and assembly lines, where they help control speed and torque for precise operations.

2. Wind Turbines: Wind turbines utilize gear reducers to transform the low rotational speed of the wind turbine rotor into the higher speed needed for electricity generation, optimizing energy conversion.

3. Automotive Transmissions: Automobiles use gear reducers as part of their transmissions to optimize power delivery from the engine to the wheels, allowing the vehicle to operate efficiently at different speeds.

4. Robotics: Robotic systems rely on gear reducers to control the movement and articulation of robot arms, enabling precise and controlled motion for various applications.

5. Printing Presses: Gear reducers are integral to printing presses, ensuring accurate and synchronized movement of printing plates, rollers, and paper feed mechanisms.

6. Conveyor Belts: Conveyor systems in industries like mining, agriculture, and logistics use gear reducers to regulate the movement of materials along the conveyor belts.

7. Packaging Machinery: Gear reducers play a crucial role in packaging machines, controlling the speed and movement of packaging materials, filling mechanisms, and sealing components.

8. Cranes and Hoists: Cranes and hoists rely on gear reducers to lift heavy loads with precision and control, ensuring safe and efficient material handling.

9. Pumps and Compressors: Gear reducers are utilized in pumps and compressors to regulate fluid flow and pressure, optimizing energy usage in fluid transportation systems.

10. Agriculture Equipment: Tractors and other agricultural machinery use gear reducers to adjust the speed and power delivery for different tasks, such as plowing, planting, and harvesting.

These examples demonstrate the diverse applications of gear reducer technology across various industries, showcasing their role in enhancing efficiency, control, and performance in a wide range of products and systems.

gear gearbox

What maintenance practices are essential for prolonging the lifespan of gear reducers?

Proper maintenance is crucial for extending the lifespan and ensuring optimal performance of gear reducers. Here are essential maintenance practices:

1. Lubrication: Regular lubrication of gear reducers is vital to reduce friction, wear, and heat generation. Use the recommended lubricant and follow the manufacturer's guidelines for lubrication intervals.
2. Inspection: Routinely inspect gear reducers for signs of wear, damage, or leaks. Check for unusual noises, vibrations, or temperature increases during operation.
3. Alignment: Ensure proper alignment of the input and output shafts. Misalignment can lead to increased wear, noise, and reduced efficiency. Align the components according to the manufacturer's specifications.
4. Cooling and Ventilation: Maintain proper cooling and ventilation to prevent overheating. Ensure that cooling fans and vents are clean and unobstructed.
5. Seal Maintenance: Inspect and replace seals as needed to prevent contaminants from entering the gear reducer. Contaminants can lead to accelerated wear and reduced performance.
6. Bolts and Fasteners: Regularly check and tighten bolts and fasteners to prevent loosening during operation, which can cause misalignment or component damage.
7. Replacing Worn Components: Replace worn or damaged components, such as gears, bearings, and seals, with genuine parts from the manufacturer.
8. Vibration Analysis: Conduct periodic vibration analysis to identify potential issues early. Excessive vibration can indicate misalignment or component wear.
9. Maintenance Records: Keep detailed maintenance records, including lubrication schedules, inspection dates, and component replacements. This helps track the history of the gear reducer and aids in future maintenance planning.
10. Training: Provide proper training to maintenance personnel on gear reducer maintenance and troubleshooting techniques.

By adhering to these maintenance practices, you can maximize the lifespan of your gear reducers, minimize downtime, and ensure reliable operation in your industrial processes.

gear gearbox

Can you explain the different types of gear reducers available in the market?

There are several types of gear reducers commonly used in industrial applications:

1. Spur Gear Reducers: These reducers have straight teeth and are cost-effective for applications requiring moderate torque and speed reduction. They are efficient but may produce more noise compared to other types.

2. Helical Gear Reducers: Helical gears have angled teeth, which provide smoother and quieter operation compared to spur gears. They offer higher torque capacities and are suitable for heavy-duty applications.

3. Bevel Gear Reducers: Bevel gears have conical shapes and intersect at an angle, allowing them to transmit power between non-parallel shafts. They are commonly used in applications where shafts intersect at 90 degrees.

4. Worm Gear Reducers: Worm gears consist of a worm (screw) and a mating gear (worm wheel). They offer high torque reduction and are used for applications requiring high ratios, although they can be less efficient.

5. Planetary Gear Reducers: These reducers use a system of planetary gears to achieve high torque output in a compact design. They provide excellent torque multiplication and are commonly used in robotics and automation.

6. Cycloidal Gear Reducers: Cycloidal drives use an eccentric cam to achieve speed reduction. They offer high shock load resistance and are suitable for applications with frequent starting and stopping.

7. Harmonic Drive Reducers: Harmonic drives use a flexible spline to achieve high gear reduction ratios. They provide high precision and are commonly used in applications requiring accurate positioning.

8. Hypoid Gear Reducers: Hypoid gears have helical teeth and non-intersecting shafts, making them suitable for applications with space limitations. They offer high torque and efficiency.

Each type of gear reducer has its own advantages and limitations, and the choice depends on factors such as torque requirements, speed ratios, noise levels, space constraints, and application-specific needs.

China Professional Industrial Robots Gear Reducer Hmcg-I with Hot selling
editor by CX 2024-03-26

China Custom Ncj Series Helical Gearbox with Dual Voltage Motor gearbox drive shaft

Product Description

Starshine Drive NCJ Series Helical Geared Motor

Features:

High efficiency and energy saving: low energy, low noise, small vibration, low temperature rise, wide output speed, and high efficiency: 92%-96%.
With wide variable range of voltage and frequency motor from 20HZ to 60HZ, and voltage from 320V to 420V.
Modular design with strong interchangeability.
Iron or aluminum casting house, good rigidity, high strength and excellent heat-loss.
Advanced design: gear pair processed by carburizing and quenching heat treatment, and unique low noise gear tooth design to ensure the service life.
Free maintenance: special lubrication to guarantee normal running for 20,000 hours without oil replacement;
Easy replacement: can replace cycloid gearbox and upgrade product

Technical Parameters

Type	Old Type	Output Torque	Output Shaft Dia.
SNR02	NCJ02	130N.m	φ22
SNR03	NCJ03	250N.m	φ28
SNR04	NCJ04	500N.m	φ32
SNR05	NCJ05	750N.m	φ40
SNRW03Y	NCJT03Y2	250N.m	φ35
SNRL04Y	NCJF04Y2	450N.m	φ35

About Us

ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control

Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer's position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.

7. Certificate: all of our products pass ISO, CE certificate.

Packing

Delivery

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Machinery, Agricultural Machinery
Function:	Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Single-Step

Customization:	Available \| Customized Request