Tag Archives: electric motor gear reducer

China Standard Maintenance-Free Ratio 7: 1 750W Electric Motor Planetary Gear Reducer supplier

Product Description

Maintenance-Free Ratio 7:1 400W 750W Electric Motor Planetary Gear Reducer

Nickel chromium molybdenum alloy steel gear is manufactured with carburizing heat treatment for high abrasion resistance and impact toughness and by honing process to increase gear precision and low noise operation.Internal gear bore uses needle roller to obtain higher abrasion resistance and strength.

Product Description

Products fearures:
1.With bevel gear reversing mechanism,right angle steering output is realized;
2.Square flange output,standard size;
3.The input specification are complete and there are many choices;
4.Spur transmission ,single cantilever structurer,design simple,high cost performance;
5.Keyway can be opened in the force shaft;
6.stable operation,low noise;
7.Size range:60-120mm
8.Ratio range:3-100;
9.Backlash:8-16arcmin;
10.Support custom according to drawings or samples

Product Parameters

Specifications PVFN60 PVFN90 PVFN120
Technal Parameters
Max. Torque Nm 1.5times rated torque
Emergency Stop Torque Nm 2.5times rated torque
Max. Radial Load N 240 450 1240
Max. Axial Load N 220 430 1000
Torsional Rigidity Nm/arcmin 1.8 4.85 11
Max.Input Speed rpm 8000 6000 6000
Rated Input Speed rpm 4000 3500 3500
Noise dB ≤58 ≤60 ≤65
Average Life Time h 20000
Efficiency Of Full Load % L1≥95%       L2≥92%
Return Backlash P1 L1 arcmin ≤8 ≤8 ≤8
L2 arcmin ≤12 ≤12 ≤12
P2 L1 arcmin ≤16 ≤16 ≤16
L2 arcmin ≤20 ≤20 ≤20
Moment Of Inertia Table L1 3 Kg*cm2 0.46 1.73 12.78
4 Kg*cm2 0.46 1.73 12.78
5 Kg*cm2 0.46 1.73 12.78
7 Kg*cm2 0.41 1.42 11.38
10 Kg*cm2 0.41 1.42 11.38
L2 12 Kg*cm2 0.44 1.49 12.18
15 Kg*cm2 0.44 1.49 12.18
16 Kg*cm2 0.72 1.49 12.18
20 Kg*cm2 0.44 1.49 12.18
25 Kg*cm2 0.44 1.49 12.18
28 Kg*cm2 0.44 1.49 12.18
30 Kg*cm2 0.44 1.49 12.18
35 Kg*cm2 0.44 1.49 12.18
40 Kg*cm2 0.44 1.49 12.18
50 Kg*cm2 0.34 1.25 11.48
70 Kg*cm2 0.34 1.25 11.48
100 Kg*cm2 0.34 1.25 11.48
Technical Parameter Level Ratio   PVFN60 PVFN90 PVFN120
Rated Torque L1 3 Nm 27 96 161
4 Nm 40 122 210
5 Nm 40 122 210
7 Nm 34 95 170
10 Nm 16 56 86
L2 12 Nm 27 96 161
15 Nm 27 96 161
16 Nm 40 122 210
20 Nm 40 122 210
25 Nm 40 122 210
28 Nm 40 122 210
30 Nm 27 96 161
35 Nm 40 122 210
40 Nm 40 122 210
50 Nm 40 122 210
70 Nm 34 95 170
100 Nm 16 56 86
Degree Of Protection   IP65
Operation Temprature ºC  - 10ºC to -90ºC
Weight L1 kg 1.7 4.4 12
L2 kg 1.9 5 14

Company Profile

Packaging & Shipping

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: Low Speed
Function: Driving
Casing Protection: Closed Type
Number of Poles: 2
Starting Mode: Direct on-line Starting
Samples:
US$ 292/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gear gearbox

How do gear reducers enhance the efficiency of conveyor systems and robotics?

Gear reducers play a significant role in improving the efficiency of both conveyor systems and robotics by optimizing speed, torque, and control. Here's how they contribute:

Conveyor Systems:

In conveyor systems, gear reducers enhance efficiency in the following ways:

  • Speed Control: Gear reducers allow precise control over the rotational speed of conveyor belts, ensuring that materials are transported at the desired speed for efficient production processes.
  • Torque Adjustment: By adjusting gear ratios, gear reducers provide the necessary torque to handle varying loads and prevent overloading, minimizing energy wastage.
  • Reverse Operation: Gear reducers enable smooth bidirectional movement of conveyor belts, facilitating tasks such as loading, unloading, and distribution without the need for additional components.
  • Synchronization: Gear reducers ensure synchronized movement of multiple conveyor belts in complex systems, optimizing material flow and minimizing jams or bottlenecks.

Robotics:

In robotics, gear reducers enhance efficiency through the following means:

  • Precision Movement: Gear reducers provide precise control over the movement of robot joints and arms, enabling accurate positioning and manipulation of objects.
  • Reduced Inertia: Gear reducers help reduce the inertia experienced by robotic components, allowing for quicker and more responsive movements while conserving energy.
  • Compact Design: Gear reducers offer a compact and lightweight solution for achieving various motion profiles in robotic systems, allowing for efficient use of space and resources.
  • Torque Amplification: By amplifying torque from the motor, gear reducers enable robots to handle heavier loads and perform tasks that require greater force, enhancing their overall capabilities.

By providing precise speed control, torque adjustment, and reliable motion transmission, gear reducers optimize the performance of conveyor systems and robotics, leading to improved efficiency, reduced energy consumption, and enhanced operational capabilities.

gear gearbox

What role do gear ratios play in optimizing the performance of gear reducers?

Gear ratios play a crucial role in optimizing the performance of gear reducers by determining the relationship between input and output speeds and torques. A gear ratio is the ratio of the number of teeth between two meshing gears, and it directly influences the mechanical advantage and efficiency of the gear reducer.

1. Speed and Torque Conversion: Gear ratios allow gear reducers to convert rotational speed and torque according to the needs of a specific application. By selecting appropriate gear ratios, gear reducers can either reduce speed while increasing torque (speed reduction) or increase speed while decreasing torque (speed increase).

2. Mechanical Advantage: Gear reducers leverage gear ratios to provide mechanical advantage. In speed reduction configurations, a higher gear ratio results in a greater mechanical advantage, allowing the output shaft to deliver higher torque at a lower speed. This is beneficial for applications requiring increased force or torque, such as heavy machinery or conveyor systems.

3. Efficiency: Optimal gear ratios contribute to higher efficiency in gear reducers. By distributing the load across multiple gear teeth, gear reducers with suitable gear ratios minimize stress and wear on individual gear teeth, leading to improved overall efficiency and prolonged lifespan.

4. Speed Matching: Gear ratios enable gear reducers to match the rotational speeds of input and output shafts. This is crucial in applications where precise speed synchronization is required, such as in conveyors, robotics, and manufacturing processes.

When selecting gear ratios for a gear reducer, it's important to consider the specific requirements of the application, including desired speed, torque, efficiency, and mechanical advantage. Properly chosen gear ratios enhance the overall performance and reliability of gear reducers in a wide range of industrial and mechanical systems.

gear gearbox

Can you explain the different types of gear reducers available in the market?

There are several types of gear reducers commonly used in industrial applications:

1. Spur Gear Reducers: These reducers have straight teeth and are cost-effective for applications requiring moderate torque and speed reduction. They are efficient but may produce more noise compared to other types.

2. Helical Gear Reducers: Helical gears have angled teeth, which provide smoother and quieter operation compared to spur gears. They offer higher torque capacities and are suitable for heavy-duty applications.

3. Bevel Gear Reducers: Bevel gears have conical shapes and intersect at an angle, allowing them to transmit power between non-parallel shafts. They are commonly used in applications where shafts intersect at 90 degrees.

4. Worm Gear Reducers: Worm gears consist of a worm (screw) and a mating gear (worm wheel). They offer high torque reduction and are used for applications requiring high ratios, although they can be less efficient.

5. Planetary Gear Reducers: These reducers use a system of planetary gears to achieve high torque output in a compact design. They provide excellent torque multiplication and are commonly used in robotics and automation.

6. Cycloidal Gear Reducers: Cycloidal drives use an eccentric cam to achieve speed reduction. They offer high shock load resistance and are suitable for applications with frequent starting and stopping.

7. Harmonic Drive Reducers: Harmonic drives use a flexible spline to achieve high gear reduction ratios. They provide high precision and are commonly used in applications requiring accurate positioning.

8. Hypoid Gear Reducers: Hypoid gears have helical teeth and non-intersecting shafts, making them suitable for applications with space limitations. They offer high torque and efficiency.

Each type of gear reducer has its own advantages and limitations, and the choice depends on factors such as torque requirements, speed ratios, noise levels, space constraints, and application-specific needs.

China Standard Maintenance-Free Ratio 7: 1 750W Electric Motor Planetary Gear Reducer   supplier China Standard Maintenance-Free Ratio 7: 1 750W Electric Motor Planetary Gear Reducer   supplier
editor by CX 2024-02-19

China Standard China Industrial Straight Gear Transmission Gearbox Planetary Speed Gear Reducer Reduction for Electric Motor best automatic gearbox

Product Description


Product Description:
  Planetar gearbox is a kind of reducer with wide versatility. The inner gear adopts low carbon alloy steel carburizing quenching and grinding or nitriding process. Planetary gearbox has the characteristics of small structure size, large output torque, high speed ratio, high efficiency, safe and reliable performance, etc. The inner gear of the planetary gearbox can be divided into spur gear and helical gear. 

Technical parameter:

Section number single section
Reduction ratio i 3 4 5 6 7 8 9 10
Rated output torque (Ta) Nm 55 50 60 55 50 45 40 40
Emergency stop torque (Tzwor*) Nm Three times the rated output torque
Rated input speed (n) rpm 5000
Maximum input speed (na) rpm 1000o
Ultra-precision backlash (PO) arcmin -
Precision backlash (P1) arcmin ≤3
Standard backlash (P2) arcmin ≤5
Torsional rigidity Nm/arcmin 7
Allowable radial force  N 1530
allowable axial force  N 765
service life hr 20000
effectiveness (n) % ≥97%
weight kg 1.3
Operating temperature ºC -10°ºC~+90°ºC
lubricating   Synthetic grease
Protection class   IP64
Installation direction   any direction
Noise value(n1=3000rpm,no load) dB(A) ≤58
Moment of inertia (J) kg-cm' 0.16      0.14       0.13

Picture:
 

Rear Reducer features:

1. High-quality aluminum alloy, light in weight and non-rusting.
2. Large in output torque.
3. Smooth running and low noise,durable in dreadful conditions.
4. High radiation efficiency.
5. Good-looking appearance, durable in service life and small volume.
6. Suitable for omnibearing installation.

Company Information:

HangZhou ChangLong Motor Co.,Ltd

 ( original HangZhou LINNAN Special Motor Factory)

 

With 20 years' hard working on developing , designing and manufacturing the high-speed electrical spindle, we have got our new GDZ-series electrical spindle, which is well recognized by clients for its great and stable quality after being put large quantities to the market. We provide quality guarantee and after-sales service for all of our products with the free manual work and the cost price for the materials or fittings.

FAQ:

How about the warrantly about your company?

bearings=half a year, other parts a year

Which kinds of bearing you are using?
It will according to your order. We have different price range for you with different bearing.

Do you have other spare parts for spindle motor, just like gripper, VFD, collet ?
We have all kits.And we can let engineers help you to program them.

Can I visit your factory?
Yes, welcome to our factory.

Do you have installation page?
Yes,we have.

Can you show me the inspection report ?

Yes We will send you inspection report of spindle after you send me full money before despatch.

The reasen is that I'm not sure which spindle will be sent to you.Every spindle have it's inspection report .And they are different in details.Only if you pay the money,we can decide which spindle to deliver you.
 

We also have spindle motor matching inverter(VFD), collet , gripper etc.

If you need other kinds of parts, please don't hesitate to contact us.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Step: Double-Step
Type: Planetary Gear Box
Customization:
Available

|

Customized Request

gear gearbox

Can gear reducers be customized for specific industrial needs and requirements?

Yes, gear reducers can be customized to meet specific industrial needs and requirements. Manufacturers offer customization options to ensure that gear reducers are tailored to the unique demands of various applications:

1. Gear Ratio Selection: Gear reducers can be designed with specific gear ratios to achieve the desired speed reduction or increase, catering to the specific requirements of the machinery or equipment.

2. Shaft Configurations: Gear reducers can be configured with different shaft sizes, lengths, and orientations to fit seamlessly into existing systems or accommodate specific mounting arrangements.

3. Torque Capacity: Customized gear reducers can be designed to handle higher or lower torque loads based on the application's operational requirements.

4. Environmental Considerations: Gear reducers can be customized with special coatings, materials, or seals to withstand harsh environments, extreme temperatures, or corrosive conditions.

5. Noise and Vibration Reduction: Custom designs can incorporate features to reduce noise and dampen vibrations, enhancing the overall operation and user experience.

6. Mounting and Connection Options: Manufacturers can adapt gear reducer designs to include specific mounting interfaces or connection methods that align with the equipment's design.

7. Lubrication and Maintenance: Customized gear reducers can include features for easy maintenance, such as accessible lubrication points or monitoring systems.

8. Integration with Controls: Gear reducers can be customized to integrate seamlessly with control systems, sensors, or automation processes, enhancing system efficiency and performance.

By collaborating with manufacturers and providing detailed specifications, industries can obtain tailor-made gear reducers that address their specific operational needs and contribute to the success of their applications.

gear gearbox

What role do gear ratios play in optimizing the performance of gear reducers?

Gear ratios play a crucial role in optimizing the performance of gear reducers by determining the relationship between input and output speeds and torques. A gear ratio is the ratio of the number of teeth between two meshing gears, and it directly influences the mechanical advantage and efficiency of the gear reducer.

1. Speed and Torque Conversion: Gear ratios allow gear reducers to convert rotational speed and torque according to the needs of a specific application. By selecting appropriate gear ratios, gear reducers can either reduce speed while increasing torque (speed reduction) or increase speed while decreasing torque (speed increase).

2. Mechanical Advantage: Gear reducers leverage gear ratios to provide mechanical advantage. In speed reduction configurations, a higher gear ratio results in a greater mechanical advantage, allowing the output shaft to deliver higher torque at a lower speed. This is beneficial for applications requiring increased force or torque, such as heavy machinery or conveyor systems.

3. Efficiency: Optimal gear ratios contribute to higher efficiency in gear reducers. By distributing the load across multiple gear teeth, gear reducers with suitable gear ratios minimize stress and wear on individual gear teeth, leading to improved overall efficiency and prolonged lifespan.

4. Speed Matching: Gear ratios enable gear reducers to match the rotational speeds of input and output shafts. This is crucial in applications where precise speed synchronization is required, such as in conveyors, robotics, and manufacturing processes.

When selecting gear ratios for a gear reducer, it's important to consider the specific requirements of the application, including desired speed, torque, efficiency, and mechanical advantage. Properly chosen gear ratios enhance the overall performance and reliability of gear reducers in a wide range of industrial and mechanical systems.

gear gearbox

What industries and machinery commonly utilize gear reducers?

Gear reducers are widely used across various industries and types of machinery for torque reduction and speed control. Some common industries and applications include:

  • 1. Manufacturing: Gear reducers are used in manufacturing equipment such as conveyors, mixers, and packaging machines to control speed and transmit power efficiently.
  • 2. Automotive: They are utilized in vehicles for applications like power transmission in transmissions and differentials.
  • 3. Aerospace: Gear reducers are used in aircraft systems, including landing gear mechanisms and engine accessories.
  • 4. Robotics and Automation: They play a crucial role in robotic arms, CNC machines, and automated production lines.
  • 5. Mining and Construction: Gear reducers are used in heavy machinery like excavators, bulldozers, and crushers for power transmission and torque multiplication.
  • 6. Energy and Power Generation: Wind turbines, hydroelectric generators, and other power generation equipment use gear reducers to convert rotational speed and transmit power.
  • 7. Marine and Shipbuilding: They are used in ship propulsion systems, steering mechanisms, and anchor handling equipment.
  • 8. Material Handling: Gear reducers are essential in conveyor systems, elevators, and hoists for controlled movement of materials.
  • 9. Food and Beverage: They find applications in food processing equipment like mixers, grinders, and packaging machines.
  • 10. Paper and Pulp: Gear reducers are used in machinery for pulp processing, paper production, and printing.

These examples represent just a fraction of the industries and machinery that benefit from the use of gear reducers to optimize power transmission and achieve the desired motion characteristics.

China Standard China Industrial Straight Gear Transmission Gearbox Planetary Speed Gear Reducer Reduction for Electric Motor   best automatic gearbox	China Standard China Industrial Straight Gear Transmission Gearbox Planetary Speed Gear Reducer Reduction for Electric Motor   best automatic gearbox
editor by CX 2024-02-08

China best CZPT Electric Motor 6W-250W AC Gear Motor 60mm-104mm Reducer with Good quality

Product Description

Product Description

 

 

Detailed Photos

Certifications

Packaging & Shipping

 

Company Profile

 

FAQ

Q: How to select a suitable motor or gearbox?
A:If you have motor pictures or drawings to show us, or you have detailed specifications, such as, voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors or gearboxes?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but some kind of molds are necessory to be developped which may need exact cost and design charging.

Q: What's your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: Low Speed
Number of Stator: Single-Phase
Samples:
US$ 25/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gear gearbox

How do manufacturers ensure the precision of gear tooth profiles in gear reducers?

Manufacturers employ several techniques to ensure the precision of gear tooth profiles in gear reducers, which is crucial for optimal performance and efficiency:

1. Precision Machining: Gear teeth are typically machined using advanced CNC (Computer Numerical Control) machines that can achieve high levels of accuracy and repeatability. This ensures consistent gear tooth profiles across multiple components.

2. Quality Control Measures: Rigorous quality control processes, such as dimensional inspections and profile measurements, are performed at various stages of manufacturing to verify that gear tooth profiles meet the required specifications.

3. Tooth Profile Design: Engineers use specialized software and simulation tools to design gear tooth profiles with precise involute shapes and accurate dimensions. These designs are then translated into machine instructions for manufacturing.

4. Material Selection: High-quality materials with excellent wear resistance and dimensional stability are chosen to minimize the potential for deformation or inaccuracies during machining and operation.

5. Heat Treatment: Heat treatment processes, such as carburizing and quenching, are applied to enhance the surface hardness and durability of gear teeth, reducing the risk of wear and deformation over time.

6. Tooth Grinding and Finishing: After initial machining, gear teeth often undergo precision grinding and finishing processes to achieve the desired tooth profile accuracy and surface finish.

7. Post-Processing Inspection: Gear tooth profiles are inspected again after manufacturing processes to verify that the final components meet the specified tolerances and performance criteria.

8. Computer-Aided Manufacturing (CAM): CAM software is used to generate tool paths and machining instructions, enabling precise control over tool movements and material removal during gear manufacturing.

By combining these techniques and leveraging advanced manufacturing technologies, manufacturers can achieve the necessary precision in gear tooth profiles, resulting in reliable and efficient gear reducers for various industrial applications.

gear gearbox

How do gear reducers ensure efficient power transmission and motion control?

Gear reducers play a vital role in ensuring efficient power transmission and precise motion control in various industrial applications. They achieve this through the following mechanisms:

  • 1. Speed Reduction/Increase: Gear reducers allow you to adjust the speed between the input and output shafts. Speed reduction is essential when the output speed needs to be lower than the input speed, while speed increase is used when the opposite is required.
  • 2. Torque Amplification: By altering the gear ratio, gear reducers can amplify torque from the input to the output shaft. This enables machinery to handle higher loads and provide the necessary force for various tasks.
  • 3. Gear Train Efficiency: Well-designed gear trains within reducers minimize power losses during transmission. Helical and spur gears, for example, offer high efficiency by distributing load and reducing friction.
  • 4. Precision Motion Control: Gear reducers provide precise control over rotational motion. This is crucial in applications where accurate positioning, synchronization, or timing is required, such as in robotics, CNC machines, and conveyor systems.
  • 5. Backlash Reduction: Some gear reducers are designed to minimize backlash, which is the play between gear teeth. This reduction in play ensures smoother operation, improved accuracy, and better control.
  • 6. Load Distribution: Gear reducers distribute the load evenly among multiple gear teeth, reducing wear and extending the lifespan of the components.
  • 7. Shock Absorption: In applications where sudden starts, stops, or changes in direction occur, gear reducers help absorb and dampen shocks, protecting the machinery and ensuring reliable operation.
  • 8. Compact Design: Gear reducers provide a compact solution for achieving specific speed and torque requirements, allowing for space-saving integration into machinery.

By combining these principles, gear reducers facilitate the efficient and controlled transfer of power, enabling machinery to perform tasks accurately, reliably, and with the required force, making them essential components in a wide range of industries.

gear gearbox

How do gear reducers handle variations in input and output speeds?

Gear reducers are designed to handle variations in input and output speeds through the use of different gear ratios and configurations. They achieve this by utilizing intermeshing gears of varying sizes to transmit torque and control rotational speed.

The basic principle involves connecting two or more gears with different numbers of teeth. When a larger gear (driving gear) engages with a smaller gear (driven gear), the rotational speed of the driven gear decreases while the torque increases. This reduction in speed and increase in torque enable gear reducers to efficiently adapt to variations in input and output speeds.

The gear ratio is a critical factor in determining how much the speed and torque change. It is calculated by dividing the number of teeth on the driven gear by the number of teeth on the driving gear. A higher gear ratio results in a greater reduction in speed and a proportionate increase in torque.

Planetary gear reducers, a common type, use a combination of gears including sun gears, planet gears, and ring gears to achieve different speed reductions and torque enhancements. This design provides versatility in handling variations in speed and torque requirements.

In summary, gear reducers handle variations in input and output speeds by using specific gear ratios and gear arrangements that enable them to efficiently transmit power and control motion characteristics according to the application's needs.

China best CZPT Electric Motor 6W-250W AC Gear Motor 60mm-104mm Reducer   with Good quality China best CZPT Electric Motor 6W-250W AC Gear Motor 60mm-104mm Reducer   with Good quality
editor by CX 2024-01-29

China high quality High Efficiency Inline Gear Speed Reducer with Electric AC Brake Motor bevel gearbox

Product Description

Product Description

KPC Series helical gearbox is a new generation product which designed basing on the modular system, It can be connected respectively with motors such as IEC standard motor, brake motor, explosion-proof motor, frequency motor, servo motor and so on. it has 4 types(),power from 0.12kw to 4.0kw, ratio from 3.66 to 58.09, Max torque from 120Nm to 500Nm.It can be connect discretionary(foot or flange) and use multi-mounting positions accordingly. This product is widely used in textile, foodstuff, beverage,tobacco, logistics industrial fields,etc.

        Product Characteristics

  1. Modular construction
  2. High efficiency
  3. Precise grinding, low noise
  4. Compact structural design
  5. Univeral mounting
  6. Aluminium housing, light in weight
  7. Carbonize and grinding hardened gears, durable
  8. Multi-structure, can be combined in different forms to meet various transmission condition

       Installation:
      1.Foot mounted
      2.Output Flange mounted
      3.B14 Flange mounted

      Models:
      1.KPC..P(Foot-mounted): KPC01P,KPC02P,KPC03P,KPC04P
      2.KPCF..P(Output Flange-mounted): KPCF01P,KPCF02P,KPCF03P,KPCF04P
      3.KPCZ..P(B14 Flange-mounted): KPCZ01P,KPCZ02P,KPCZ03P,KPCZ04P

Detailed Photos

Product Parameters

GEARBOX SELECTING TABLES  
KPC01..       n1=1400r/min       120Nm  
n2 M2max Fr2 i Proportion 63B5 71B5/B14 80B5/B14 90B5/B14  
[r/min] [Nm] [N]  
26 120 2600 53.33  160/3          
31 120 2600 45.89  413/9          
35 120 2600 40.10  3248/81          
39 120 2560 35.47  532/15          
49 120 2380 28.50  770/27          
59 120 2230 23.56  212/9          
71 120 2100 19.83  119/6          
78 90 2030 17.86  1357/76          
96 120 1900 14.62  658/45          
101 90 1860 13.80* 69/5          
118 120 1770 11.90  2464/207          
143 120 1660 9.81  1148/117          
153 80 1630 9.17  1219/133          
181 80 1540 7.72  1173/152          
246 70 1390 5.69  1081/190          
302 70 1290 4.63  88/19          
366 70 1210 3.82  943/247          
KPC02..       n1=1400r/min       200Nm  
n2 M2max Fr2 i Proportion 63B5 71B5/B14 80B5/B14 90B5/B14  
[r/min] [Nm] [N]  
26 200 4500 54.00* 54/1          
30 200 4500 46.46* 3717/80          
34 200 4500 40.60* 203/5          
39 200 4270 35.91* 3591/100          
48 200 3970 28.88* 231/8          
59 200 3730 23.85* 477/20          
70 200 3520 20.08* 3213/160          
82 140 3330 17.10  3009/176          
95 200 3180 14.81* 2961/200          
106 140 3060 13.21  2907/220          
116 200 2970 12.05  1386/115          
141 200 2780 9.93  2583/260          
159 120 2670 8.78  2703/308          
189 120 2520 7.39  2601/352          
257 100 2280 5.45  2397/440          
316 100 2120 4.43  102/23          
383 80 1990 3.66  2091/572          
KPC03..       n1=1400r/min         300Nm
n2 M2max Fr2 i Proportion 71B5/B14 80B5/B14 90B5/B14 100B5/B14 112B5/B14
[r/min] [Nm] [N]
24 300 6000 58.09  639/11          
28 300 6000 50.02  2201/44          
32 300 6000 43.75  4331/99          
36 300 6000 38.73  426/11          
40 300 5860 34.62  4189/121          
49 300 5480 28.30  4047/143          
64 280 5571 21.78  1917/88          
81 280 4660 17.33  3621/209          
93 260 4440 15.06  497/33          
113 260 4160 12.37  1633/132          
136 240 3910 10.28  3053/297          
177 180 3590 7.93  1269/160          
222 180 3320 6.31  2397/380          
255 150 3170 5.48  329/60          
311 150 2970 4.50  1081/240          
374 150 2790 3.74  2571/540          
KPC04..       n1=1400r/min       500Nm  
n2 M2max Fr2 i Proportion 80B5/B14 90B5/B14 100B5/B14 112B5/B14  
[r/min] [Nm] [N]
24 500 8000 58.09  639/11          
28 500 8000 50.02  2201/44          
32 500 8000 43.75  4331/99          
36 500 8000 38.73  426/11          
40 500 7950 34.62  4189/121          
49 500 7430 28.30  4047/143          
64 480 6810 21.78  1917/88          
81 480 6310 17.33  3621/209          
93 460 6571 15.06  497/33          
113 460 5640 12.37  1633/132          
136 440 5300 10.28  3053/297          
177 260 4860 7.93  1269/160          
222 260 4510 6.31  2397/380          
255 230 4300 5.48  329/60          
311 230 4030 4.50  1081/240          
374 200 3780 3.74 2571/540          

Outline Dimension:

Company Profile

About our company:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.Our leading products is  full range of RV571-150 worm reducers , also supplied hypoid helical gearbox, PC units, UDL Variators and AC Motors.Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.With fast delivery, superior after-sales service, advanced producing facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.

Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia

Logistics

We can dispatch goods by sea, by train, by air according to customer instruction

After Sales Service

1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other ServiceIncluding modeling selection guide, installation guide, and problem resolution guide, etc.

FAQ

1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer's nameplate for gearboxes.

2.Q:What is your terms of payment ?
   A: 30% deposit before production,balance T/T before delivery.

3.Q:Are you a trading company or manufacturer?
   A:We are a manufacurer with advanced equipment and experienced workers.

4.Q:What's your production capacity?
   A:8000-9000 PCS/MONTH

5.Q:Free sample is available or not?
   A:Yes, we can supply free sample if customer agree to pay for the courier cost

6.Q:Do you have any certificate?
   A:Yes, we have CE certificate and SGS certificate report.

Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company! /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step
Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gear gearbox

How do gear reducers enhance the efficiency of conveyor systems and robotics?

Gear reducers play a significant role in improving the efficiency of both conveyor systems and robotics by optimizing speed, torque, and control. Here's how they contribute:

Conveyor Systems:

In conveyor systems, gear reducers enhance efficiency in the following ways:

  • Speed Control: Gear reducers allow precise control over the rotational speed of conveyor belts, ensuring that materials are transported at the desired speed for efficient production processes.
  • Torque Adjustment: By adjusting gear ratios, gear reducers provide the necessary torque to handle varying loads and prevent overloading, minimizing energy wastage.
  • Reverse Operation: Gear reducers enable smooth bidirectional movement of conveyor belts, facilitating tasks such as loading, unloading, and distribution without the need for additional components.
  • Synchronization: Gear reducers ensure synchronized movement of multiple conveyor belts in complex systems, optimizing material flow and minimizing jams or bottlenecks.

Robotics:

In robotics, gear reducers enhance efficiency through the following means:

  • Precision Movement: Gear reducers provide precise control over the movement of robot joints and arms, enabling accurate positioning and manipulation of objects.
  • Reduced Inertia: Gear reducers help reduce the inertia experienced by robotic components, allowing for quicker and more responsive movements while conserving energy.
  • Compact Design: Gear reducers offer a compact and lightweight solution for achieving various motion profiles in robotic systems, allowing for efficient use of space and resources.
  • Torque Amplification: By amplifying torque from the motor, gear reducers enable robots to handle heavier loads and perform tasks that require greater force, enhancing their overall capabilities.

By providing precise speed control, torque adjustment, and reliable motion transmission, gear reducers optimize the performance of conveyor systems and robotics, leading to improved efficiency, reduced energy consumption, and enhanced operational capabilities.

gear gearbox

What role do gear ratios play in optimizing the performance of gear reducers?

Gear ratios play a crucial role in optimizing the performance of gear reducers by determining the relationship between input and output speeds and torques. A gear ratio is the ratio of the number of teeth between two meshing gears, and it directly influences the mechanical advantage and efficiency of the gear reducer.

1. Speed and Torque Conversion: Gear ratios allow gear reducers to convert rotational speed and torque according to the needs of a specific application. By selecting appropriate gear ratios, gear reducers can either reduce speed while increasing torque (speed reduction) or increase speed while decreasing torque (speed increase).

2. Mechanical Advantage: Gear reducers leverage gear ratios to provide mechanical advantage. In speed reduction configurations, a higher gear ratio results in a greater mechanical advantage, allowing the output shaft to deliver higher torque at a lower speed. This is beneficial for applications requiring increased force or torque, such as heavy machinery or conveyor systems.

3. Efficiency: Optimal gear ratios contribute to higher efficiency in gear reducers. By distributing the load across multiple gear teeth, gear reducers with suitable gear ratios minimize stress and wear on individual gear teeth, leading to improved overall efficiency and prolonged lifespan.

4. Speed Matching: Gear ratios enable gear reducers to match the rotational speeds of input and output shafts. This is crucial in applications where precise speed synchronization is required, such as in conveyors, robotics, and manufacturing processes.

When selecting gear ratios for a gear reducer, it's important to consider the specific requirements of the application, including desired speed, torque, efficiency, and mechanical advantage. Properly chosen gear ratios enhance the overall performance and reliability of gear reducers in a wide range of industrial and mechanical systems.

gear gearbox

Can you explain the different types of gear reducers available in the market?

There are several types of gear reducers commonly used in industrial applications:

1. Spur Gear Reducers: These reducers have straight teeth and are cost-effective for applications requiring moderate torque and speed reduction. They are efficient but may produce more noise compared to other types.

2. Helical Gear Reducers: Helical gears have angled teeth, which provide smoother and quieter operation compared to spur gears. They offer higher torque capacities and are suitable for heavy-duty applications.

3. Bevel Gear Reducers: Bevel gears have conical shapes and intersect at an angle, allowing them to transmit power between non-parallel shafts. They are commonly used in applications where shafts intersect at 90 degrees.

4. Worm Gear Reducers: Worm gears consist of a worm (screw) and a mating gear (worm wheel). They offer high torque reduction and are used for applications requiring high ratios, although they can be less efficient.

5. Planetary Gear Reducers: These reducers use a system of planetary gears to achieve high torque output in a compact design. They provide excellent torque multiplication and are commonly used in robotics and automation.

6. Cycloidal Gear Reducers: Cycloidal drives use an eccentric cam to achieve speed reduction. They offer high shock load resistance and are suitable for applications with frequent starting and stopping.

7. Harmonic Drive Reducers: Harmonic drives use a flexible spline to achieve high gear reduction ratios. They provide high precision and are commonly used in applications requiring accurate positioning.

8. Hypoid Gear Reducers: Hypoid gears have helical teeth and non-intersecting shafts, making them suitable for applications with space limitations. They offer high torque and efficiency.

Each type of gear reducer has its own advantages and limitations, and the choice depends on factors such as torque requirements, speed ratios, noise levels, space constraints, and application-specific needs.

China high quality High Efficiency Inline Gear Speed Reducer with Electric AC Brake Motor   bevel gearbox	China high quality High Efficiency Inline Gear Speed Reducer with Electric AC Brake Motor   bevel gearbox
editor by CX 2023-12-25

China Professional Zjy Series 220V 380V Electric Motor Helical Gear Speed Reducer comer gearbox

Product Description

Product Description

ZJY Series 220V 380V Electric Motor Helical Gear Speed Reducer

 Mounting type: Tie rod hanging shaft mountedZJY Series Shaft Mounted Gearbox Reducer is mounted directly in a way of hanging on the dynamic input shaft of matching master machine, which dispenses with the connecting accessory and decelerator erection platform. It is applicable for the mechanical drive of bucket elevator,belt conveyor, and flight conveyor, as well as matching with other similar master machine.

ZJY Series Shaft Mounted Speed Reducer is manufactured according to JB/T9050.1-1999 standard, and main drive components are made of quality alloy steels. Gar wheel is processed with carburizing and quenching and grinding teeth with precision of Class6(GB10095.1-2001). The gearbox reducer is compact size with high carrying capacity, long service life, low noise, and high efficiency. ZJY has the same output torque as ZJ shaft mounted gearbox. ZJY weights only 30% of ZJ, therefore, the rigidity required for the master machine frame is significantly decreased, and ZJY drives stably.

Not only ZJY series shaft mounted speed reducer can be operated double direction, but also can be equipped with anti-runback device to achieve 1 way braking.

Detailed Photos

 

Product Parameters

Models Output Shaft Bore Input Power Max. Torque Ratio Weight
           
ZJY106 45mm 2.3kW~12kW 750N.m 10, 11.2, 12.5, 14, 16, 18, 20, 22.4, 25 27kg
ZJY125 55mm 3.8kW~19kW 1250N.m   40kg
ZJY150 60mm 7.1kW~33kW 2120N.m   67kg
ZJY180 70mm 11kW~56kW 3550N.m   110kg
ZJY212 85mm 19kW~92kW 6000N.m   173kg
ZJY250 100mm 32kW~157kW 10000N.m   250kg
ZJY300 120mm 46kW~225kW 14720N.m   380kg

Applications:Belt Conveyors, Scraper Conveyors, Bucket Elevators
Installation:Hanging Shaft Mounted Equipped With Pulley
Lubrication:Oil-bath and Splash Lubrication
Cooling:Natural Cooling

Rated Power Rated Torque Gear Arrangement Input Speed Output Speed Ratio
0.83KW~225KW 265~17000N.m Helical Hardened Gearbox 1450r/min,960r/min, 750r/min 30~150r/min I=1/10,1/11.2,
1/12.5,,1/25

Packaging & Shipping

Company Profile

Our Advantages

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients' special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ

1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

If you have any demand for our products please feel free to contact me.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Industry
Function: Speed Changing, Speed Reduction
Layout: Parallel
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Double-Step
Customization:
Available

|

Customized Request

gear gearbox

What are the considerations for choosing the appropriate lubrication for gear reducers?

Choosing the appropriate lubrication for gear reducers is crucial for ensuring optimal performance, longevity, and efficiency. Several considerations should be taken into account when selecting the right lubrication:

1. Load and Torque: The magnitude of the load and torque transmitted by the gear reducer affects the lubrication's viscosity and film strength requirements. Heavier loads may necessitate higher viscosity lubricants.

2. Operating Speed: The speed at which the gear reducer operates impacts the lubrication's ability to maintain a consistent and protective film between gear surfaces.

3. Temperature Range: Consider the temperature range of the operating environment. Lubricants with suitable viscosity indexes are crucial to maintaining performance under varying temperature conditions.

4. Contaminant Exposure: If the gear reducer is exposed to dust, dirt, water, or other contaminants, the lubrication should have proper sealing properties and resistance to contamination.

5. Lubrication Interval: Determine the desired maintenance interval. Some lubricants require more frequent replacement, while others offer extended operational periods.

6. Compatibility with Materials: Ensure that the chosen lubricant is compatible with the materials used in the gear reducer, including gears, bearings, and seals.

7. Noise and Vibration: Some lubricants have properties that can help reduce noise and dampen vibrations, improving the overall user experience.

8. Environmental Impact: Consider environmental regulations and sustainability goals when selecting lubricants.

9. Manufacturer Recommendations: Follow the manufacturer's recommendations and guidelines for lubrication type, viscosity grade, and maintenance intervals.

10. Monitoring and Analysis: Implement a lubrication monitoring and analysis program to assess lubricant condition and performance over time.

By carefully evaluating these considerations and consulting with lubrication experts, industries can choose the most suitable lubrication for their gear reducers, ensuring reliable and efficient operation.

gear gearbox

What factors should be considered when selecting the right gear reducer?

Choosing the appropriate gear reducer involves considering several crucial factors to ensure optimal performance and efficiency for your specific application:

  • 1. Torque and Power Requirements: Determine the amount of torque and power your machinery needs for its operation.
  • 2. Speed Ratio: Calculate the required speed reduction or increase to match the input and output speeds.
  • 3. Gear Type: Select the appropriate gear type (helical, bevel, worm, planetary, etc.) based on your application's torque, precision, and efficiency requirements.
  • 4. Mounting Options: Consider the available space and the mounting configuration that suits your machinery.
  • 5. Environmental Conditions: Evaluate factors such as temperature, humidity, dust, and corrosive elements that may impact the gear reducer's performance.
  • 6. Efficiency: Assess the gear reducer's efficiency to minimize power losses and improve overall system performance.
  • 7. Backlash: Consider the acceptable level of backlash or play between gear teeth, which can affect precision.
  • 8. Maintenance Requirements: Determine the maintenance intervals and procedures necessary for reliable operation.
  • 9. Noise and Vibration: Evaluate noise and vibration levels to ensure they meet your machinery's requirements.
  • 10. Cost: Compare the initial cost and long-term value of different gear reducer options.

By carefully assessing these factors and consulting with gear reducer manufacturers, engineers and industry professionals can make informed decisions to select the right gear reducer for their specific application, optimizing performance, longevity, and cost-effectiveness.

gear gearbox

Function of Gear Reducers in Mechanical Systems

A gear reducer, also known as a gear reduction unit or gearbox, is a mechanical device designed to reduce the speed of an input shaft while increasing its torque output. It accomplishes this through the use of a set of interlocking gears with different sizes.

The primary function of a gear reducer in mechanical systems is to:

  • Speed Reduction: The gear reducer takes the high-speed rotation of the input shaft and transmits it to the output shaft through a set of gears. The gears are configured in such a way that the output gear has a larger diameter than the input gear. As a result, the output shaft rotates at a lower speed than the input shaft, but with increased torque.
  • Torque Increase: Due to the size difference between the input and output gears, the torque applied to the output shaft is greater than that of the input shaft. This torque multiplication allows the system to handle heavier loads and perform tasks requiring higher force.

Gear reducers are widely used in various industries and applications where it's necessary to adapt the speed and torque characteristics of a power source to meet the requirements of the driven equipment. They can be found in machinery such as conveyor systems, industrial machinery, vehicles, and more.

China Professional Zjy Series 220V 380V Electric Motor Helical Gear Speed Reducer   comer gearbox	China Professional Zjy Series 220V 380V Electric Motor Helical Gear Speed Reducer   comer gearbox
editor by CX 2023-12-22

China OEM Speed Reducer Small Induction Motors Worm Gear Speed Reducer with Electric Motor Reducer with Motor synchromesh gearbox

Product Description

Product Description

 

Rotary speed reducer/slewing drive

Main fetures:

1.large speed ratio range

2.small volume,low weight ,saving space for mounting.

3.high efficiency,high mechanical strength and high quality aluminum alloy housing

4.long life service,large output torque,low noise and little vibration

5.low temperature rise,omnibearing installation ,easy to connect with other machinery.

6.high carry ability,elegant apperance.

7.CE standard,input power can be 0.06KW-15KW

8.stable transmission
 

Product Parameters

­

 

Detailed Photos

More Models

 

Packaging & Shipping

 

Company Profile

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Layout: Coaxial
Gear Shape: Bevel / Miter
Type: Planetary Gear Reducer
Output Torque: 0-50 Nm
Customization:
Available

|

Customized Request

gear gearbox

How do gear reducers contribute to energy efficiency in machinery and equipment?

Gear reducers play a significant role in enhancing energy efficiency in various machinery and equipment. Here's how they contribute:

1. Speed Reduction: Gear reducers are commonly used to reduce the speed of the input shaft, allowing the motor to operate at a higher speed where it's most efficient. This speed reduction helps match the motor's optimal operating range, reducing energy consumption.

2. Torque Increase: Gear reducers can increase torque output while decreasing speed, enabling machinery to handle higher loads without the need for a larger, more energy-intensive motor.

3. Matching Load Requirements: By adjusting gear ratios, gear reducers ensure that the machinery's output speed and torque match the load requirements. This prevents the motor from operating at unnecessary high speeds, saving energy.

4. Variable Speed Applications: In applications requiring variable speeds, gear reducers allow for efficient speed control without the need for continuous motor adjustments, improving energy usage.

5. Efficient Power Transmission: Gear reducers efficiently transmit power from the motor to the load, minimizing energy losses due to friction and inefficiencies.

6. Motor Downsizing: Gear reducers enable the use of smaller, more energy-efficient motors by converting their higher speed, lower torque output into the lower speed, higher torque needed for the application.

7. Decoupling Motor and Load Speeds: In cases where the motor and load speeds are inherently different, gear reducers ensure the motor operates at its most efficient speed while still delivering the required output to the load.

8. Overcoming Inertia: Gear reducers help overcome the inertia of heavy loads, making it easier for motors to start and stop, reducing energy consumption during frequent operation.

9. Precise Control: Gear reducers provide precise control over speed and torque, optimizing the energy consumption of machinery in processes that require accurate adjustments.

10. Regenerative Braking: In some applications, gear reducers can be used to capture and convert kinetic energy back into electrical energy during braking or deceleration, improving overall energy efficiency.

By efficiently managing speed, torque, and power transmission, gear reducers contribute to energy-efficient operation, reducing energy consumption, and minimizing the environmental impact of machinery and equipment.

gear gearbox

How do gear reducers handle shock loads and sudden changes in torque?

Gear reducers are designed to handle shock loads and sudden changes in torque through several mechanisms that enhance their durability and reliability in challenging operating conditions.

1. Robust Construction: Gear reducers are constructed using high-strength materials and precision manufacturing techniques. This ensures that the gears, bearings, and other components can withstand sudden impacts and high torque fluctuations without deformation or failure.

2. Shock-Absorbing Features: Some gear reducer designs incorporate shock-absorbing features, such as flexible couplings, elastomeric elements, or torsionally flexible gear designs. These features help dampen and dissipate the energy from sudden shocks or torque spikes, reducing the impact on the entire system.

3. Torque Limiters: In applications where shock loads are common, torque limiters may be integrated into the gear reducer. These devices automatically disengage or slip when a certain torque threshold is exceeded, preventing damage to the gears and other components.

4. Overload Protection: Gear reducers can be equipped with overload protection mechanisms, such as shear pins or torque sensors. These mechanisms detect excessive torque and disengage the drive temporarily, allowing the system to absorb the shock or adjust to the sudden torque change.

5. Proper Lubrication: Adequate lubrication is essential for managing shock loads and sudden torque changes. High-quality lubricants reduce friction and wear, helping the gear reducer withstand dynamic forces and maintain smooth operation.

6. Dynamic Load Distribution: Gear reducers distribute dynamic loads across multiple gear teeth, which helps prevent localized stress concentrations. This feature minimizes the risk of tooth breakage and gear damage when subjected to sudden changes in torque.

By incorporating these design features and mechanisms, gear reducers can effectively handle shock loads and sudden changes in torque, ensuring the longevity and reliability of various industrial and mechanical systems.

gear gearbox

Are there variations in gear reducer designs for specific tasks and applications?

Yes, gear reducer designs vary widely to suit specific tasks and applications across various industries. Manufacturers offer a range of gear reducer types and configurations to accommodate different requirements, including:

  • Helical Gear Reducers: These are versatile and provide smooth and efficient torque transmission. They are commonly used in applications requiring high precision and moderate speed reduction, such as conveyors, mixers, and agitators.
  • Bevel Gear Reducers: These are ideal for transmitting power between intersecting shafts. They are often used in heavy machinery, printing presses, and automotive applications.
  • Worm Gear Reducers: These provide compact solutions and are suitable for applications with higher speed reduction requirements, such as conveyor systems, winches, and elevators.
  • Planetary Gear Reducers: These offer high torque density and are used in applications demanding precise control, such as robotics, aerospace, and heavy-duty machinery.
  • Parallel Shaft Gear Reducers: Commonly used in industrial machinery, these reducers are designed for high torque and reliability.
  • Right-Angle Gear Reducers: These are used when space limitations require a change in shaft direction, commonly found in packaging equipment and conveyors.

Each type of gear reducer has unique features and benefits that make it suitable for specific tasks. Manufacturers often provide customization options to tailor gear reducers to the precise requirements of an application, including gear ratios, mounting options, and input/output configurations.

Therefore, the variation in gear reducer designs allows industries to select the most appropriate type based on factors such as torque, speed, space constraints, precision, and environmental conditions.

China OEM Speed Reducer Small Induction Motors Worm Gear Speed Reducer with Electric Motor Reducer with Motor   synchromesh gearbox	China OEM Speed Reducer Small Induction Motors Worm Gear Speed Reducer with Electric Motor Reducer with Motor   synchromesh gearbox
editor by CX 2023-12-21

China best Professional Industrial Spare Part Electric Gear Motor Speed Gearbox Planetary Reducer for Laser Machine automatic gearbox

Product Description


Product Description:
  Planetar gearbox is a kind of reducer with wide versatility. The inner gear adopts low carbon alloy steel carburizing quenching and grinding or nitriding process. Planetary gearbox has the characteristics of small structure size, large output torque, high speed ratio, high efficiency, safe and reliable performance, etc. The inner gear of the planetary gearbox can be divided into spur gear and helical gear. 

Technical parameter:

Section number single section
Reduction ratio i 3 4 5 6 7 8 9 10
Rated output torque (Ta) Nm 55 50 60 55 50 45 40 40
Emergency stop torque (Tzwor*) Nm Three times the rated output torque
Rated input speed (n) rpm 5000
Maximum input speed (na) rpm 1000o
Ultra-precision backlash (PO) arcmin -
Precision backlash (P1) arcmin ≤3
Standard backlash (P2) arcmin ≤5
Torsional rigidity Nm/arcmin 7
Allowable radial force  N 1530
allowable axial force  N 765
service life hr 20000
effectiveness (n) % ≥97%
weight kg 1.3
Operating temperature ºC -10°ºC~+90°ºC
lubricating   Synthetic grease
Protection class   IP64
Installation direction   any direction
Noise value(n1=3000rpm,no load) dB(A) ≤58
Moment of inertia (J) kg-cm' 0.16      0.14       0.13

Picture:
 

Rear Reducer features:

1. High-quality aluminum alloy, light in weight and non-rusting.
2. Large in output torque.
3. Smooth running and low noise,durable in dreadful conditions.
4. High radiation efficiency.
5. Good-looking appearance, durable in service life and small volume.
6. Suitable for omnibearing installation.

Company Information:

HangZhou ChangLong Motor Co.,Ltd

 ( original HangZhou LINNAN Special Motor Factory)

 

With 20 years' hard working on developing , designing and manufacturing the high-speed electrical spindle, we have got our new GDZ-series electrical spindle, which is well recognized by clients for its great and stable quality after being put large quantities to the market. We provide quality guarantee and after-sales service for all of our products with the free manual work and the cost price for the materials or fittings.

FAQ:

How about the warrantly about your company?

bearings=half a year, other parts a year

Which kinds of bearing you are using?
It will according to your order. We have different price range for you with different bearing.

Do you have other spare parts for spindle motor, just like gripper, VFD, collet ?
We have all kits.And we can let engineers help you to program them.

Can I visit your factory?
Yes, welcome to our factory.

Do you have installation page?
Yes,we have.

Can you show me the inspection report ?

Yes We will send you inspection report of spindle after you send me full money before despatch.

The reasen is that I'm not sure which spindle will be sent to you.Every spindle have it's inspection report .And they are different in details.Only if you pay the money,we can decide which spindle to deliver you.
 

We also have spindle motor matching inverter(VFD), collet , gripper etc.

If you need other kinds of parts, please don't hesitate to contact us.

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Step: Double-Step
Type: Planetary Gear Box
Customization:
Available

|

Customized Request

gear gearbox

How do gear reducers contribute to energy efficiency in machinery and equipment?

Gear reducers play a significant role in enhancing energy efficiency in various machinery and equipment. Here's how they contribute:

1. Speed Reduction: Gear reducers are commonly used to reduce the speed of the input shaft, allowing the motor to operate at a higher speed where it's most efficient. This speed reduction helps match the motor's optimal operating range, reducing energy consumption.

2. Torque Increase: Gear reducers can increase torque output while decreasing speed, enabling machinery to handle higher loads without the need for a larger, more energy-intensive motor.

3. Matching Load Requirements: By adjusting gear ratios, gear reducers ensure that the machinery's output speed and torque match the load requirements. This prevents the motor from operating at unnecessary high speeds, saving energy.

4. Variable Speed Applications: In applications requiring variable speeds, gear reducers allow for efficient speed control without the need for continuous motor adjustments, improving energy usage.

5. Efficient Power Transmission: Gear reducers efficiently transmit power from the motor to the load, minimizing energy losses due to friction and inefficiencies.

6. Motor Downsizing: Gear reducers enable the use of smaller, more energy-efficient motors by converting their higher speed, lower torque output into the lower speed, higher torque needed for the application.

7. Decoupling Motor and Load Speeds: In cases where the motor and load speeds are inherently different, gear reducers ensure the motor operates at its most efficient speed while still delivering the required output to the load.

8. Overcoming Inertia: Gear reducers help overcome the inertia of heavy loads, making it easier for motors to start and stop, reducing energy consumption during frequent operation.

9. Precise Control: Gear reducers provide precise control over speed and torque, optimizing the energy consumption of machinery in processes that require accurate adjustments.

10. Regenerative Braking: In some applications, gear reducers can be used to capture and convert kinetic energy back into electrical energy during braking or deceleration, improving overall energy efficiency.

By efficiently managing speed, torque, and power transmission, gear reducers contribute to energy-efficient operation, reducing energy consumption, and minimizing the environmental impact of machinery and equipment.

gear gearbox

What role do gear ratios play in optimizing the performance of gear reducers?

Gear ratios play a crucial role in optimizing the performance of gear reducers by determining the relationship between input and output speeds and torques. A gear ratio is the ratio of the number of teeth between two meshing gears, and it directly influences the mechanical advantage and efficiency of the gear reducer.

1. Speed and Torque Conversion: Gear ratios allow gear reducers to convert rotational speed and torque according to the needs of a specific application. By selecting appropriate gear ratios, gear reducers can either reduce speed while increasing torque (speed reduction) or increase speed while decreasing torque (speed increase).

2. Mechanical Advantage: Gear reducers leverage gear ratios to provide mechanical advantage. In speed reduction configurations, a higher gear ratio results in a greater mechanical advantage, allowing the output shaft to deliver higher torque at a lower speed. This is beneficial for applications requiring increased force or torque, such as heavy machinery or conveyor systems.

3. Efficiency: Optimal gear ratios contribute to higher efficiency in gear reducers. By distributing the load across multiple gear teeth, gear reducers with suitable gear ratios minimize stress and wear on individual gear teeth, leading to improved overall efficiency and prolonged lifespan.

4. Speed Matching: Gear ratios enable gear reducers to match the rotational speeds of input and output shafts. This is crucial in applications where precise speed synchronization is required, such as in conveyors, robotics, and manufacturing processes.

When selecting gear ratios for a gear reducer, it's important to consider the specific requirements of the application, including desired speed, torque, efficiency, and mechanical advantage. Properly chosen gear ratios enhance the overall performance and reliability of gear reducers in a wide range of industrial and mechanical systems.

gear gearbox

What are the benefits of using a gear reducer in industrial applications?

Gear reducers offer several benefits that make them indispensable in various industrial applications:

1. Speed Reduction: Gear reducers allow the reduction of high-speed input from motors or engines to lower, more usable output speeds for specific applications, ensuring proper equipment operation and safety.

2. Torque Increase: By leveraging the mechanical advantage of gear ratios, gear reducers can significantly increase torque output, enabling the handling of heavy loads and providing the necessary power for tasks such as lifting, conveying, and processing.

3. Precise Control: Gear reducers enable fine-tuning of rotational speed and torque, providing precise control over machinery and processes, which is crucial in industries like manufacturing, material handling, and robotics.

4. Shock Load Absorption: Gear reducers can absorb and dampen sudden shocks or changes in load, protecting both the machinery and connected components from abrupt forces that could otherwise lead to damage.

5. Versatility: With various gear types (e.g., spur, helical, worm) and designs, gear reducers can be tailored to different applications, including those requiring specific speed ratios, torque ranges, and environmental conditions.

6. Efficient Power Transmission: Gear reducers offer high mechanical efficiency, minimizing energy loss during power transmission, which is especially valuable in energy-conscious industries.

7. Compact Design: Gear reducers provide a compact solution for transmitting power and adjusting speeds, making them suitable for installations with space constraints.

8. Reliability and Longevity: Well-designed and properly maintained gear reducers can offer extended service life, contributing to reduced downtime and maintenance costs.

Overall, gear reducers enhance the performance, efficiency, and reliability of industrial equipment, making them essential components in a wide range of applications across various industries.

China best Professional Industrial Spare Part Electric Gear Motor Speed Gearbox Planetary Reducer for Laser Machine   automatic gearbox	China best Professional Industrial Spare Part Electric Gear Motor Speed Gearbox Planetary Reducer for Laser Machine   automatic gearbox
editor by CX 2023-09-22

China Best Sales Reduction RV Worm Gear Electric Motor Speed Reducer Gearbox gearbox adjustment

Product Description

 

PROFESSIONAL MANUFACTURE
-- SINCE 1995

Reduction RV Worm Gear Electric Motor Speed Reducer Gearbox

Chinese electric motor speed reducer is widely used in mining machinery, chemical industry,steel metallurgy, light

industry,environmental protection, paper making, printing, lifting transport, food industry and so on.

Main Series Product: R series helical gear motor reducer, K series spiral bevel gear reducer, NGW, P series planetary gear reducer, H B series helical gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial hard tooth surface cylindrical gearbox reducer, D (DBY and DCY) serial hard tooth surface cone gear reducer, cycloidal speed reducer, etc. Meanwhile, map sample processing business can be undertaken.

Product Description

 

It realized serialization and modularization with compact structure and wide range of transmission ratio.

The transmission efficiency reach up to 96%.
 

The gear processed by Carburizing, Nitriding & Grinding.
 

High efficiency, superior performance with less energy consumption High precision gear, steady transmission, low noise, large load capacity, long service life.
 

Support various of installation method.

 

Product Parameters

 

Size

NMRV25

NMRV30

NMRV40

NMRV50

NMRV63

NMRV75

NMRV90

NMRV110

NMRV130

Flange Type

56B14

63B5

71B5

80B5

90B35

100/112B35

100/112B35

132B35

132B35

 

63B14

63B5

71B5

80B5

90B35

90B35

100/112B35

100/112B35

 

170

 

63B5

71B5

80B5

80B5

90B35

90B35

Model selection for washing machine Gear Box Transmission:
Closely using the ideal reduction ratio.
Reduction ratio = servo motor speed / reducer output shaft speed
Torque calculation: Torque calculation is very important for the life of reducer, and pay attention to whether the maximum torque value (TP) of acceleration exceeds the maximum load torque of the reducer.
The applicable power is usually the applicable power of the servo models on the market, the applicability of the reducer is very high, the working coefficient can be maintained above 1.2, but the choice can also be based on their own needs to decide. industrial helical gearbox. Robot Arm Gear Reducer Nmrv Transmission Worm Gearbox.

Detailed Photos


Chinese Speed Reducer/industrial helical gearbox is a mechanical transmission in many fields of the national economy. The product categories covered by the industry include all kinds of gear reducer, planetary gear reducer and worm reducer, as well as various special transmission devices such as speed increasing device, speed control Devices, including various types of flexible transmission devices, such as compound transmission. Products and services in the field of metallurgy, nonferrous metals, coal, building materials, ships, water conservancy, electricity, construction machinery and petrochemical industries.

In all fields of national economy and national defense industry, gearbox products have a wide range of applications. Food light industry, electric machinery, construction machinery, metallurgy machinery, cement machinery, environmental protection machinery, electronic appliances, road construction machinery, water conservancy machinery, chemical machinery, mining machinery, conveyor machinery, building materials machinery, rubber machinery, petroleum machinery and other industries have strong demand of Reducer products.

Working principle of gear reducer :

When the output speed of the motor of the gear reducer is input from the driving shaft, the small gear of the reducer will move. The large gear is linked with the small gear, so the movement of the small gear will drive the movement of the large gear. The number of teeth is more than the number of teeth on the pinion, so the speed of the big gear will be slower than that of the pinion, and then output through the output shaft of the big gear, thus playing the role of output deceleration.

Packaging & Shipping

 

Application

 

Driven machines
Waste water treatment Thickeners,filter presses,flocculation apparata,aerators,raking equipment,combined longitudinal and rotary rakes,pre-thickeners,screw pumps,water turbines,centrifugal pumps Dredgers Bucket conveyors, dumping devices, carterpillar travelling gears, bucket wheel excavators as pick up, bucket wheel excavator for primitive material, cutter head, traversing gears
Chemical industry Plate bending machines, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifuges Metal working mills plate tilters, ingot pushers, winding machines, cooling bed transfer frames, roller straigheners, table continuous intermittent, roller tables reversing tube mills, shears continuous, casting drivers, reversing CHINAMFG mills
Metal working mills Reversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drives Conveyors Bucket conveyors, hauling winches, hoists, belt conveyors, good lifts, passenger lifts, apron conveyors, escalators, rail travlling gears
Frequency converters Reciprocating compressors
Cranes Slewing gears, luffing gears, travelling gears, hoisting gear, derricking jib cranes Cooling towers Cooling tower fans, blowers axial and radial
Cane sugar production Cane knives, cane mills Beet sugar production Beet cossettes macerators, extraction plants, mechanical refrigerators, juice boilers, sugar beet washing machines, sugar beet cutter
Paper machines Pulper drives Cableways Material ropeways, continuous ropeway
Cement industry Concrete mixer, breaker, rotary kilns, tube mills, separators, roll crushers    

Company Profile

 

Established in 1995 , HangZhou Boji Machinery is a professional manufacturer and exporter that is concerned with the design, development and production of Gearbox Speed Reducer. We are located in HangZhou of ZheJiang Province, with convenient transportation access. With our own brand "TianQi", all of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our company possesses complete machining center, lathe, gear shaping machine, gear milling machine, gear grinding machine and assembling lines. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
Besides, In 2005,we attained ISO9001 certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network CHINAMFG South America, Saudi Arabia, Vietnam, Pakistan, Philippines, South Africa and other countries and regions.
With rich export experience, high quality products, competitive prices, good service and in-time delivery, we certain that we can meet all of your requirement and exceed your expectations. Our feature is bright with new cooperative relationships with companies from all over the world. We look CHINAMFG to speaking with you to future discuss how we can be of service to you.

FAQ

1. Who are we?
We are the Factory, with over 25 years of production experience, based in ZheJiang , China, start from 1995,sell to Domestic Market(50.00%),Mid East(10.00%),Southeast Asia(10.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),North America(3.00%),Africa(2.00%),Southern Europe(2.00%),South Asia(2.00%),Central America(1.00%).

2. Can you customize according to our requirements?
Yes, we can design nonstandard products according to customer's drawing and sample.

3.What can you buy from us?
speed reducer,gearbox,gear motor,pump,crusher

4. Why should you buy from us not from other suppliers?
Founded in 1995, with over 20 years of production experience and credibility. With professional engineer team, advanced technology production and skilled workers.Specialized in the production of reducer. Map sample processing business can be undertaken.

5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor, Machinery, Manufacturing Plant
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Transmission
Layout: Worm Gear
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|

Order Sample

RV Worm Gear Electric Motor Speed Reducer Gearbox
Customization:
Available

|

Customized Request

worm gearbox

Is it Possible to Reverse the Direction of a Worm Gearbox?

Yes, it is possible to reverse the direction of a worm gearbox by changing the orientation of either the input or output shaft. However, reversing the direction of a worm gearbox can have some implications that need to be considered:

  • Efficiency: Reversing the direction of a worm gearbox can potentially affect its efficiency. Worm gearboxes are typically more efficient in one direction of rotation due to the design of the worm and worm wheel.
  • Backlash: Reversing the direction of rotation might lead to increased backlash or play in the gearbox, which can impact precision and smooth operation.
  • Lubrication: Depending on the gearbox's design, reversing the direction could affect lubrication distribution and lead to uneven wear on the gear teeth.
  • Load: Reversing the direction might also impact the gearbox's load-carrying capacity, especially if it's designed for predominantly one-way operation.
  • Noise and Vibration: Direction reversal can sometimes result in increased noise and vibration due to changes in gear engagement and meshing behavior.

If you need to reverse the direction of a worm gearbox, it's advisable to consult the gearbox manufacturer's guidelines and recommendations. They can provide insights into whether the specific gearbox model is suitable for reversible operation and any precautions or adjustments needed to ensure proper functioning.

worm gearbox

Worm Gearbox vs. Helical Gearbox: A Comparison

Worm gearboxes and helical gearboxes are two popular types of gear systems, each with its own set of advantages and disadvantages. Let's compare them:

Aspect Worm Gearbox Helical Gearbox
Efficiency Lower efficiency due to sliding friction between the worm and worm wheel. Higher efficiency due to rolling contact between helical gear teeth.
Torque Transmission Excellent torque transmission and high reduction ratios achievable in a single stage. Good torque transmission, but may require multiple stages for high reduction ratios.
Noise and Vibration Generally higher noise and vibration levels due to sliding action. Lower noise and vibration levels due to smoother rolling contact.
Backlash Higher inherent backlash due to the design. Lower backlash due to meshing of helical teeth.
Efficiency at Higher Speeds Less suitable for high-speed applications due to efficiency loss. More suitable for high-speed applications due to higher efficiency.
Overload Protection Natural self-locking feature provides some overload protection. May not have the same level of inherent overload protection.
Applications Commonly used for applications requiring high reduction ratios, such as conveyor systems and heavy-duty machinery. Widely used in various applications including automotive transmissions, industrial machinery, and more.

Both worm and helical gearboxes have their place in engineering, and the choice between them depends on the specific requirements of the application. Worm gearboxes are preferred for applications with high reduction ratios, while helical gearboxes are chosen for their higher efficiency and smoother operation.

worm gearbox

Can a Worm Gearbox Provide High Torque Output?

Yes, a worm gearbox is capable of providing high torque output due to its unique design and principle of operation. Worm gears are known for their high torque multiplication capabilities, making them suitable for applications that require significant torque transfer.

The torque output of a worm gearbox is influenced by several factors:

  • Lead Angle: The lead angle of the worm affects the mechanical advantage of the gear system. A larger lead angle can result in higher torque output.
  • Worm Diameter: A larger diameter worm can offer increased torque output as it provides more contact area with the gear.
  • Gear Ratio: The gear ratio between the worm and the gear determines the torque multiplication factor. A higher gear ratio leads to higher torque output.
  • Lubrication: Proper lubrication is essential to minimize friction and ensure efficient torque transmission.
  • Material and Quality: High-quality materials and precision manufacturing contribute to the gearbox's ability to handle high torque loads.

Due to their ability to provide high torque output in a compact form factor, worm gearboxes are commonly used in various industrial applications, including heavy machinery, construction equipment, conveyor systems, and more.

China Best Sales Reduction RV Worm Gear Electric Motor Speed Reducer Gearbox   gearbox adjustment	China Best Sales Reduction RV Worm Gear Electric Motor Speed Reducer Gearbox   gearbox adjustment
editor by CX 2023-09-18

China high quality OEM RV040 RV050 RV063 Electric Motor with Gear Box Gearbox Nmrv Worm Gear Reducer manufacturer

Product Description

Specification

Type

Worm Gearbox/Worm Gear Speed Reducer

Model

NMRV:571,030,040,050,063,075,090,110,130,150

Center distance

25-150mm

Ratio

5,7.5,10,15,20,25,30,40,50,60,80,100

Torque

1.8-1800Nm

Motor

2 pole, 4 pole, 6 pole

Mounting position

Omnidirectional

Color

Blue/Silver grey Or On request

Material

NMRV571~090:Aluminum alloy; NMRV110~150 Cast iron

Product Description

 

 

Worm Gear Speed Reducer.

Worm gear speed reducers are popular for their flexibility and efficiency, because they can show the best deceleration capacity in the smallest space and are typically applied in transmissions with low speed and high torque.
The worm speed reducer can also be easily mounted with various accessories like torque arms, different types of flanges, shafts and so on.
We attach much importance to the details of the products. The housing of our worm gearbox is made of aluminum alloy or cast iron,the worm is made of carburized 20Cr, and the suppliers of raw materials are rigorously screened, thus to ensure our products are of high quality, long service life and low noise.
Sihai is a professional manufacturer of speed reducers that can provide you with both single-stage worm gear reducer and two-stage worm gear reducer, as well as customized gearboxes according to your requirement.

Details

Multiple inputs and outputs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

00:00

 

00:00

 

FAQ

Q1.How to choose a gearbox which meets our requirement?

A1. You can provide the technical information of output speed,motor power,motor parameter,output torque,equipment connection mode etc.Or,you can refer to our catalogue and confirm with me.

 

Q2. How is your price? Can you offer any discount?
A2: We will give the best price we can base on your needs and the quantities.

 

Q3. Do you offer any visiting?
A3: Yes! Welcome!Notify me in advance.

 

Q4. When is the best time to contact you?
A4: Any time, we will reply you as soon as possible.

 

Q5. How long will it take for the lead time?
A5: At the time we agreed

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Machinery, Marine, Agricultural Machinery, Building Material Shops
Function: Speed Changing, Speed Reduction, Speed Changing, Speed Reduction
Layout: Gearbox, Gearbox
Hardness: Gearbox, Gearbox
Installation: Gearbox, Gearbox
Step: Gearbox, Gearbox
Customization:
Available

|

Customized Request

worm gearbox

Calculating Gear Ratio in a Worm Reducer

The gear ratio in a worm reducer is determined by the number of teeth on the worm wheel (also known as the worm gear) and the number of threads on the worm shaft. The gear ratio formula for a worm reducer is:

Gear Ratio = Number of Teeth on Worm Wheel / Number of Threads on Worm Shaft

For example, if the worm wheel has 60 teeth and the worm shaft has a single thread, the gear ratio would be 60:1.

It's important to note that worm reducers have an inherent self-locking property due to the angle of the worm threads. As a result, the gear ratio also affects the mechanical advantage and the system's ability to resist backdriving.

When calculating the gear ratio, ensure that the worm reducer is properly designed and that the gear ratio aligns with the desired mechanical characteristics for your application. Additionally, consider factors such as efficiency, load capacity, and speed limitations when selecting a gear ratio for a worm reducer.

worm gearbox

Worm Gearbox Applications in Robotics and Automation

Worm gearboxes play a crucial role in various robotics and automation applications due to their unique characteristics and benefits. Here are some common applications where worm gearboxes are used:

  • Robotic Arm Movement: Worm gearboxes are employed in robotic arms to provide precise and controlled movement. The self-locking property of worm gearboxes helps maintain the arm's position without requiring additional brakes.
  • Conveyor Systems: In automated production lines, worm gearboxes are used to drive conveyor belts and move materials or products along assembly lines with accuracy.
  • Precision Positioning: Worm gearboxes are used in precision positioning systems, such as those found in pick-and-place robots and CNC machines. They ensure accurate and repeatable movements.
  • Pan and Tilt Mechanisms: Worm gearboxes are utilized in pan and tilt mechanisms of surveillance cameras, robotic cameras, and sensors. The self-locking feature helps stabilize and maintain the desired angle.
  • Automated Gates and Doors: Worm gearboxes are used in automated gate and door systems to control their opening and closing movements smoothly and safely.
  • Material Handling: Robots in warehouses and distribution centers use worm gearboxes to manipulate and lift objects, enhancing efficiency in material handling.
  • Medical Robotics: Worm gearboxes are employed in medical robots for surgical procedures, diagnostic equipment, and rehabilitation devices, ensuring precise and controlled movements.
  • Industrial Robots: Industrial robots rely on worm gearboxes for various tasks, including welding, painting, assembly, and packaging, where precise movements are essential.
  • Automated Testing Equipment: In testing and inspection applications, worm gearboxes provide the necessary movement and positioning for accurate testing and measurements.
  • Food and Beverage Industry: Worm gearboxes are used in automated food processing and packaging systems, ensuring hygienic and precise movement of products.

Worm gearboxes are preferred in these applications due to their compact size, high torque output, self-locking feature, and ability to provide a right-angle drive. However, selecting the right gearbox requires considering factors such as load, speed, efficiency, and environmental conditions.

worm gearbox

Lubrication Requirements for a Worm Gearbox

Lubrication is crucial for maintaining the performance and longevity of a worm gearbox. Here are the key considerations for lubricating a worm gearbox:

  • Type of Lubricant: Use a high-quality, high-viscosity lubricant specifically designed for worm gearboxes. Worm gearboxes require lubricants with additives that provide proper lubrication and prevent wear.
  • Lubrication Interval: Follow the manufacturer's recommendations for lubrication intervals. Regularly check the gearbox's temperature and oil condition to determine the optimal frequency of lubrication.
  • Oil Level: Maintain the proper oil level to ensure effective lubrication. Too little oil can lead to insufficient lubrication, while too much oil can cause overheating and foaming.
  • Lubrication Points: Identify all the lubrication points on the gearbox, including the worm and wheel gear surfaces. Apply the lubricant evenly to ensure complete coverage.
  • Temperature: Consider the operating temperature of the gearbox. Some lubricants have temperature limits, and extreme temperatures can affect lubricant viscosity and performance.
  • Cleanliness: Keep the gearbox and the surrounding area clean to prevent contaminants from entering the lubricant. Use proper filtration and seals to maintain a clean environment.
  • Monitoring: Regularly monitor the gearbox's temperature, noise level, and vibration to detect any signs of inadequate lubrication or other issues.

Proper lubrication will reduce friction, wear, and heat generation, ensuring smooth and efficient operation of the worm gearbox. Always refer to the manufacturer's guidelines for lubrication specifications and intervals.

China high quality OEM RV040 RV050 RV063 Electric Motor with Gear Box Gearbox Nmrv Worm Gear Reducer   manufacturer China high quality OEM RV040 RV050 RV063 Electric Motor with Gear Box Gearbox Nmrv Worm Gear Reducer   manufacturer
editor by CX 2023-09-15